Racor CCV Install on Detroit 8v92's

[rustybucket]

What hose did you use for the air box drains. I have some melted ones from the last "fix".

If you have melted hoses something else is going on there. Should not be that much heat in that area unless it was up against an exhaust manifold.

I use push loc hose on pretty much everything it's suited for. I REALLY like being able to easily make my own hoses. For an airbox drain pushloc is probably overkill but it was what I had on hand and used.

 

[barebone]

Yes, cheap plastic hoses were ran right under the exhaust manifold. I'm just looking for recommendations. I'm leaning towards Black high Temp Reinforced Silicone Heater Hose good up to 350F and route it better.

 

[Boatsb]

In sell the lumishore and they have controlled color and patterns. It's a removable and replaceable whail in the water and seems to hold up pretty well

 

[rustybucket]

Yes, cheap plastic hoses were ran right under the exhaust manifold. I'm just looking for recommendations. I'm leaning towards Black high Temp Reinforced Silicone Heater Hose good up to 350F and route it better.

I'd go for standard hose and just route them better. Should be plenty of room there to keep them closer to the block than the exhaust.