Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Co2 Tanks Rusting Away

  • Thread starter Thread starter barkdee
  • Start date Start date
  • Replies Replies 25
  • Views Views 8,185

barkdee

Active member
Joined
Jul 16, 2014
Messages
64
Status
  1. OWNER - I own a Hatteras Yacht
Hatteras Model
50' CONV -Series II (1979 - 1983)
The fire suppression tanks on my 50C are rusted away at their bases. They need replacing or a new system needs to be installed. Anyone have suggestions on what to do? What kind of tanks they are? Or what would be a good replacement system?

Thanks for any help.
 
I had mine pressure tested and a little rust was just cosmetic after 38 years. Of course the boat is freshwater for no telling how many years.
 
These about rusted through. They look like a tree a beaver' s been chewing on.
 
One of mine failed its 10 year pressure test. The Company that did the inspection supplied a used replacement at a very reasonable price... About $350 as I recall.
 
Don't mean to alarm you but a boat in the marina had one explode and it tore that boat all to hell. I would find someone to let the pressure off that thing. Those cylenders need to be tested every 10 years if I remember correctly. There are better systems available now. Those co2 systems make a hell of a mess after use.
 
Most restaurants still use CO2 systems in their hoods because they do not make a mess. The bottle however can blow up and potentially total and or sink the boat.

I would get a fire extinguisher company out there tomorrow to let the pressure off the tank.

I am happy with my system and am checking it now using the manual now. I am also going to get my tank hydro tested.:cool:
 
CO2 has no residue. IMO, it's the best stuff for that application in an engine room. It will even shut down the engine on it's own. It's disadvantage is that the tank is big/heavy. After CO2 discharge the only thing that is needed is to recharge the bottle. No cleaning at all.
 
We had a similar situation and the fire extinguisher company that serviced the system also supplied a second hand replacement tank, as mentioned earlier. They also applied spray on truck bed liner type product to the lower 12" of the bottle to help protect from bilge moisture etc. 6 Years later and still looks perfect.
 
The service company that tested mine discharged it before removing it and it sounds like a gunshot. He checked all three discharge points and they were frosty. I was very pleased with the system.
 
With that much rust, you probably should address the source of the moisture that is causing it. Salt water?

Bobk
 
Over 45 years my tank rusted at the base and was replaced with a used one. May have been caused by a hot water leak near by. The original tank base was a cup shaped piece of wood. I drilled a hole in the center so this would drain instead of holding water. Then epoxied the base of the new tank. Hope to get another 45 years.

Fire extinguisher company also replaced the head or trigger assembly. I meant to ask why but never got around to it. Since they certify it I hope it needed it.
 
Ok, calling someone this morning to get the tanks out.

Rust is from the boat sitting unused and unmaintained for two or three years. I'm in the middle of refurbishing it.
 
Good morning,

I am now the "new" owner of 43 dcmy... a great boat and outstanding prior owner (thanks Fred), formerly- Fin A Lee, located in New Port News, VA.

The timing on this perfect as I need to get the CO2 tank inspected, hydro'd and refilled.

Looking for recommendations for a company in the tidewater area that can handle this...

Also, will they expect me to pull the tank and take it to them? or do they generally have their service people in the field who can do this? Any idea of what costs to expect?

I am sure that I will reaching out to "the brain trust" much more in the future.

Also very interested in finding more Hatteras Blog sites (found a few).
Interested in other's experiences and find that there are almost always some valuable info and ideas.

Thanks everyone,

Dave
 
What were the extinguishers that put out a white powder? I always thought those were co2. Has halon been replaced?
 
These tanks are 35lb co2 tanks for a Kidde system. I have two quotes so far for replacements. One for $750 and one for $1,570. Per tank. Must be some sort of rare earth metal they're made of.
 
These tanks are 35lb co2 tanks for a Kidde system. I have two quotes so far for replacements. One for $750 and one for $1,570. Per tank. Must be some sort of rare earth metal they're made of.

yes indeed. Sounds like they're made from "Unobtainium"
 
I think I'd be looking on the used market. I know you already have used tanks, but I think maybe you could find used tanks in better condition so they would pass inspection. You might look in Boats & Harbours, come to think of it.
 
What were the extinguishers that put out a white powder? I always thought those were co2. Has halon been replaced?

Those are Dry Chemical extinguishers. And you're right, they do make a helluva mess.

The other option is Halon or one of it's modern replacements. They don't make the mess, but they have their limitations too.
 
Just because there is rust does not mean the tank has to be replaced. Your fire extinguisher certification company will visually inspect and hydro test the tank. These tanks are, by design, thicker on the bottom.
 
Halon has been replaced .



The EPA had it banned. Probably because it worked .
 

Forum statistics

Threads
38,154
Messages
448,719
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom