Search results

I have a 2015 3.5 HP Mercury Fourstroke with a 2017 Achilles LS-4RU roll-up dinghy. The engine has less than one hour on it and the same with the dinghy. I bought both as NOS. I commissioned both at the same time in 2018 and they have been stored in my basement ever since. Here are the specs...

Added more pics...

Brand New Galley Maid Porcelain Marine Head Elongated Bowl. Still in crate as received from Galley Maid. Seafoam White. Includes Dometic Seat Dimensions here... http://users.neo.registeredsite.com/...Bowl_Flyer.pdf $250 plus shipping.

The unit was taken out during a re-fit. it is 1990 vintage and will need to have new filters installed and generally refurbished. Description is below: Galley Maid Reverse Osmosis Desalinator Watermaker. A completely self contained system to produce crystal clear bacteria free potable water...

Here's an excerpt from the manual...

I have a 24V Vetus 220. The manual says it can be run continuously for 7 minutes, but I have not tested it to that time limit. https://www.vetus.com/en/manoeuvring-systems/electric-bow-thrusters/bow-thruster-220kgf.html I find mine very helpful in docking in 15+ knot winds, especially when I...

Trump parade on Mystic River just finished. Total boat count was 658.... a well organized event with boats of all sizes. Everyone respecting one another.... everyone at idle speed up and back down the river. GREAT EVENT!

It has been my experience that most often this symptom is the triac. However, I just the same symptom with a different root cause. My AC system is comprised of 5 total compressors that operate off a single raw water pump. All AC controls have been updated to SMX II. Last week, my Master State...

My 1976 58 LRC was reapainted using Awlgrip H8002 "Cream"

A weird thing happended last Friday.... I was struggling with repairs my shirk wrap in 50 MPH+ winds here in Mystic. I had the hatch open when I climbed on top of the flybridge pilot station to secure the shrink wrap. THe boat heeled over from a wind gust and I braced myself on the open...

Here are a couple pics of my rear deck drain.. they are definitely fiberglass and appear to be molded into or perhaps integral part of the fiberglass deck... 1976 58 LRC

If they are older Bomar hatches, they are likely an aluminum-magnesium alloy (Almag)… likely Almag 35 which is now commonly called Alloy 535. I have the spec datasheet if you need it. Several years ago on a different boat I refurbished all my Bomar hatches. I opted to go with powder coat as I...

When I removed my old washer/dryer, I was able to see the fresh air vent hose on the other side of washer/dryer closet. It has deterioriated near the connection to the fresh air vent. Looking at the vent itself. I do not see any fasteners. I do see what looks like a mounting plate screwed...

Looks like this is it...3/8" Cane Webbing... https://www.caning.com/html/product/CHR-A2/CW10224.html

I have a decorative covering on vertiliation opening in my companionway. Boat is a 1976 58' LRC.... does anyone know what this material is called and where to source it.... Sams??

So I got the door jamb cut out today... when I cut it, the top portion just fell out .... it had a datto cut (at least I "think" that's what it's called) in the top.... I could have actually just cut it on one spot at the bottom if I had known that... then there would have been no cut in the...

For perspective.... the RED LINE on the screen is about 3 feet behind the swim platform... the GREEN LINE on other side of the dock is about 12 feet...

Here was a couple unexpected surprises related to the dryer..... the vent hose was VERY clogged... and the vent hose was not connected well at the hull side...