Wtb: Fuel coolers

[micky]

I'm looking for two fuel coolers, they need to be 2" at the inlet/outlet.

 

[Boatsb]

For?

They make them in all shapes and sizes.

 

[micky]

Detroit 453T.

 

[jim rosenthal]

Try Seaboard Marine, in Oxnard, CA. Tony Athens. They have a lot of this kind of stuff- they have Cummins C takeoffs which will probably do what you want.

 

[rtrafford]

I needed a variety of units for refitting various systems. I knew my dimension goals and went directly to:

http://www.sen-dure.net

 

[Boatsb]

I'm not sure on the 453 but my 8v53 has a cooler. It would probably plumb in if there's not a cooler already there.

 

[micky]

I'm not sure on the 453 but my 8v53 has a cooler. It would probably plumb in if there's not a cooler already there.

There is a cooler but seacocks were 1.75”, hose was 2”, coolers were 1.5”, then 2” hose again and then the pump 2.5”.

Now everything will be 2”.

 

[Boatsb]

Have sen dure or lenco make what you need.

 

[micky]

Found 2 used ones for $200 each on a web site that's called Reliable Industries. They arrived today and look good. they have a lot of parts including Detroit.

 

[madhatter1]

Micky, If you have time start a thread on the work you are doing with some pix. Interesting to all. Hope things are going well for you. Enjoy.

 

[micky]

Micky, If you have time start a thread on the work you are doing with some pix. Interesting to all. Hope things are going well for you. Enjoy.

Will do when I get home tonight.