Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Turbo sources

  • Thread starter Thread starter Top Shelf
  • Start date Start date
  • Replies Replies 31
  • Views Views 4,229
News from the Garrett distributor is that availability is limited. I had to deal with further medical issues in the family this afternoon, but I'll be back in the shop Monday and I'll try some other sources.
 
Thank you. Hope all is well with you and the family. Thx
 
Well the continuing saga. M&D thinks the 23501263 is the Turbo cartridge P/N only. So I'll be looking for a
# cast into the exhaust housing. Very helpful guy, tried hard.

RPM in FLL says that's a good DD P/N #. But they don't have any new or re-mans. They're suggesting
I send them mine and let them do the re-man on those. And they claim that P/N is the Turbo Assembly

I guess the upside of sending mine in for re-man is I know they'll fit when I get em back....maybe lol

I dunno, any other ideas? Thx.
 
Call Avenger.

He's gotten me a bunch of turbos over the years. And injectors too. I've sent him stuff to evaluate more than I care to admit. He usually straightens me out on what really needs to be done.
 
I believe "Avenger" has commented here already. Has some personal issues going and said he'd get back to this
when he can.....which I certainly appreciate and can respect the "time out". No worries. Thx.
 
Sorry for the delay. Things have sort-of gotten back to normal. Unfortunately that's really all the good news I have. Complete new turbos are a long way from production at this point. However, as you've seen, cartridges are available. The problem appears to be availability of the exhaust housings.

I'm still looking for other possibilities, but I'm near the end of my resources as far as suppliers I deal with. The only other option is to rebuild what you have, which of course, depends on the condition of your exhaust housings.

If I turn up anything better I will let you know. Thank you for your patience.
 
I appreciate the efforts. I think at this point I'll send my Turbo's down to RPM in FLL and let them do the Re-man.
They claim a 4 or 5 day turn around. And with me spinning wrenches and humping them out of the engine room,
this will be a two or three week effort. So thank you again for your time and hope everything on the personal
side gets squared away. Thx.
 
Avenger said:
Sorry for the delay. Things have sort-of gotten back to normal. Unfortunately that's really all the good news I have. Complete new turbos are a long way from production at this point. However, as you've seen, cartridges are available. The problem appears to be availability of the exhaust housings.

I'm still looking for other possibilities, but I'm near the end of my resources as far as suppliers I deal with. The only other option is to rebuild what you have, which of course, depends on the condition of your exhaust housings.

If I turn up anything better I will let you know. Thank you for your patience.
Click to expand...

Is it still difficult getting turbos? I need to replace a turbo on my 8v92. The flange on the exhaust side broke off.

turbo.webp
 
Last edited:
Avenger said:
It varies. Some part numbers are on the shelf, some are not.

What is the part number on your turbo?
Click to expand...

I could not find a part number on the turbo. I have the engine serial number and was hoping to locate the part number with that.
 
Okay, PM me the serial number and we'll give it a shot.
 
Avenger said:
Okay, PM me the serial number and we'll give it a shot.
Click to expand...

Thanks. I sent the engine information and my contact information. I appreciate your help.
 
You must log in or register to reply here.

Forum statistics

Threads
38,156
Messages
448,748
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom