*Siboney 2.0* repowering our 1972 58' yachtfisherman

[MarioG]

Merry Christmas to all!

It's been a while since i have touched base with all of you here. to say we've been busy with life and our jobs is an understatement. But with the grace of god, hard work and stubborn determination, it's also been a great one as far as our beloved Siboney goes.

I must admit, I've been holding out on a little secret, but finally I can happily tell you all that I have begun the process of repowering our boat! but before I launch into the details of what engines are going in and all the justification behind all of it, I want to thank SKYCHENEY for inspiring me to take the leap! Sky helped me with several questions I had. Sky helped me immensely with a ton of progress pictures that helped me visualize the logistics of the project in addition to the raw performance data, target gearbox ratios and propeller specs he provided to me. for those that aren't familiar with the complexities of a full repower, one of the most time consuming and hardest part of this is actually finding technical, real world information. Sky put all the time, money and effort, blood, sweat and headaches into his gorgeous boat, then gave me the knowledge i was searching to fill in all blanks I had. I am forever grateful to Sky, thank you Sky!

So my Idea for this thread is to document the process as best as I can without too much complication. I just want to pay it forward, and show that if you can justify the costs, our boats will live on well into the future.

"SIBONEY 2.0" is a 3 part, individual, thread series named "REPOWERING", "STRUCTURAL", "REFITTING" that I'll be doing as I compile pictures and progress. To say that I'm excited is an understatement and I Can't wait to share it with all of you!

Cheers!

 

[MarioG]

Engines: 650HP FPT C90 EVO

sorry for the blurry screenshot. I can't upload the PDF engine spec file. but you can click on the link below and it takes you to the manufactures specs

https://fptengines.pl/wp-content/uploads/2019/08/Pleasure_C90_650_E_478_kW.pdf

 

[Avenger]

Awesome! I am so looking forward to following your adventures.

 

[SKYCHENEY]

I'm so happy to help. You'll love the boat when you get it finished. Quieter, cleaner, and soooo much torque. My latest props are 31 x 32.5 four blades and I'm almost there; just a little under-propped.

 

[sgharford]

Thank you, Mario and Sky, for sharing this project with us. Between the two of you, there must be 50 years of intimate Hatteras knowledge. There is nothing like big iron to heighten the senses! Looking forward to this thread - Scott

 

[madhatter1]

2000 foot pounds of torque? Yes please.

 

[johnjen50]

Wow! Almost half the weight and 200 more hp. I’ve seen Sky’s posts and videos but with the added length on the YF do you think she will cruise at 18knts?

 

[CGHOST4]

Sounds like a great project. What is your shaft size? Yanmar restricted the horsepower on my repower because I only had 2" shafts. I cruise at 17 knots at 90% throttle, 20gph each side.

Caesar's Ghost
1980 58 YF hull # 472

 

[Cricket]

Very exciting project MarioG, good luck with it. I've been down this path twice so just be ready for the unexpected, thought I had it all figured out after the first one. Biggest thing I learned was to go the extra mile because many years later it will be worth it.

 

[SKYCHENEY]

Wow! Almost half the weight and 200 more hp. I’ve seen Sky’s posts and videos but with the added length on the YF do you think she will cruise at 18knts?

Oh yes!! I cruise 19kts and top out over 23. He may be faster with the extra waterline length.

 

[SKYCHENEY]

Sounds like a great project. What is your shaft size? Yanmar restricted the horsepower on my repower because I only had 2" shafts. I cruise at 17 knots at 90% throttle, 20gph each side.

Caesar's Ghost
1980 58 YF hull # 472

I went up to 2.5" shafts. I think Mario is doing the same. There is also another repower of a 53ED going on right now. That's DLCameron. He already upsized his shafts a few years ago when he re-geared.

I love to see these old boats brought back to "better-than-new".

 

[edward]

Will it be posted here or on YOUTUBE ? Looking forward to posting .

 

[MarioG]

Wow! Almost half the weight and 200 more hp. I’ve seen Sky’s posts and videos but with the added length on the YF do you think she will cruise at 18knts?

HI John,

Yes I estimate at least 18Kts.

 

[MarioG]

Sounds like a great project. What is your shaft size? Yanmar restricted the horsepower on my repower because I only had 2" shafts. I cruise at 17 knots at 90% throttle, 20gph each side.

Caesar's Ghost
1980 58 YF hull # 472

Yes, Had to go up to 2.5" shafts for the HP spec and 2:1 gear ratio

 

[MarioG]

Oh yes!! I cruise 19kts and top out over 23. He may be faster with the extra waterline length.

This would be awesome! lets see what happens!

 

[MarioG]

Will it be posted here or on YOUTUBE ? Looking forward to posting .

primarly here on the HOF. perhaps youtube later. we'll see.

 

[MarioG]

Salon prep.

BTW, im not sure why some pics post sideways. i don't see a pic rotation edit button. (Admin please help)

 

[MarioG]

Me and my 19 year old did the teardown ourselves.

 

[MarioG]

Starboard engine out!

 

[jim rosenthal]

You're not wasting any time, are you.....I don't know why some photos are sideways, I'll try to fix them.