Scupper Deck Drain Cover

[M&MArmenta]

Good afternoon. We have a 1968 Hatteras 50 MY (flush deck) and we are looking for the covers for the scupper drains on either side of the salon; this is not the 6" wagon wheel style that is at the transom. It is small and odd sized. If you go to the Sam's part catalog there is a picture of the whole assembly P/N 78238 and you will see what we are looking for. We only need two of the covers not the whole deck fitting. If anyone has any or knows where we can get them it would be greatly appreciated. Doesn't look like Sam's or Skippers Marine has any but I have emailed both.Thanks

 

[SEVEN]

If you find them let us all know. A friend is missing the screw on his as well and I've looked everywhere for one with no luck. Happy hunting.

 

[M&MArmenta]

Thanks, gotta try though. Worse case, I will make a pattern and have them fabricated.

 

[SEVEN]

If that's the case let me know and I'll see if my buddy wants to invest.

 

[SEVEN]

Good afternoon. We have a 1968 Hatteras 50 MY (flush deck) and we are looking for the covers for the scupper drains on either side of the salon; this is not the 6" wagon wheel style that is at the transom. It is small and odd sized. If you go to the Sam's part catalog there is a picture of the whole assembly P/N 78238 and you will see what we are looking for. We only need two of the covers not the whole deck fitting. If anyone has any or knows where we can get them it would be greatly appreciated. Doesn't look like Sam's or Skippers Marine has any but I have emailed both.Thanks

Did you have any luck finding one?

 

[M&MArmenta]

Yes, Ben from Skippers Marine is going to measure his, draw a pattern and take a couple of pictures and send to me so we can have them fabricated. Will let you know when I have the info.Marcus

 

[SEVEN]

Perfect, I'll let the Chart Maker know. I'm sure he will want one made.

 

[chuckbullett@gmail.com]

Economies of scale perhaps. I can have it priced with our metal shop here in SF too M if you wish to share the drawing. We need to have four of them made. Regards- Chuck on Chartmaker

 

[M&MArmenta]

As soon as I get the drawing and deminsions I will let you know. We can both price it out and go with the best price. One of my thoughts was to have 2-3 extra sets made and hold the in case I run across someone else that needs them, they can have them for cost plus shipping.Marcus

 

[SEVEN]

Marcus and Chuck, John Powell another 53' needs 4 of those screens. Once you get a quote either let me know and I'll pass it on to John or, Chuck if you could call John directly. Thanks for spearheading this guys.

 

[M&MArmenta]

I got the pic and dimensions, it is not to scale as received. I will scale it up and am going to fabricate an aluminum mock up myself to ensure fit prior to getting a quote to have done in stainless, this will also allow me to figure out thickness.Sounds like we may need at least 4 sets, if anyone knows of anyone else let us know. All I ask is cost + shipping and the more we have done the cheaper they are each.Marcus

 

[TROUBLE]

SAW THIS ON EBAY.

http://www.ebay.com/itm/Hatteras-De...f7cc5a4&pid=100033&rk=2&rkt=8&sd=231695885005 art

 

[SEVEN]

That's not the one they are looking for. Their looking for the small screens just before and just after the back doors of 53 footers. Thanks for showing it however.