Replaced swim platform ladder steps

[eze2bme]

Just removed the teak steps from my swim platform ladders (1979 43DC) and replaced them with 1 inch thick starboard. If anyone wants the old teak step treads there are four for the upper ladder and three for the section that folds down to the water. They need to be sanded and re-varnished. Just pay shipping from South Carolina. Send email to eze2bme@aol.com and tag HATTERAS.

 

[Tim Powell]

where in sc. How wide are they i could use them going in to the engine room. Is the starbord kinda flimses or are they shered up by underneath suport?

 

[eze2bme]

where in sc. How wide are they i could use them going in to the engine room. Is the starbord kinda flimses or are they shered up by underneath suport?

Tim - sending you a PM.
The starboard is 1 inch thick and there is no spring or give at all, so no need for extra support beneath.

 

[eze2bme]

Old steps are taken.

 

[Boatsb]

Tim - sending you a PM.
The starboard is 1 inch thick and there is no spring or give at all, so no need for extra support beneath.

Tim make sure you use the textured starboard or you'll find out how slippery the step can be. Starboard is not great in an oily environment.

 

[Freeebird]

Might wanna read through this one again, Scott.