Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Putty In Wire Runs

  • Thread starter Thread starter Capt Chad
  • Start date Start date
  • Replies Replies 13
  • Views Views 2,574

Capt Chad

Well-known member
Joined
Dec 6, 2013
Messages
218
Status
  1. OWNER - I own a Hatteras Yacht
Hatteras Model
46' CONVERTIBLE-Series I (1974 - 1981)
While we're replacing our headliner we're going to install LED lights. Now that the old one is out I see that there is an open wire run on the stbd side passing through the fir strips. On the port sid ethe run is in use. I noticed they used a type of putty to hold the wired in place inside those holes passing through the fir strips. It seems like the best way to secure the wires I'm running on the opposite side.

Does anyone have any idea what the stuff is called? It's done a great job since 1978 so why not use it on the other side.
 
Not sure about the ceiling but I’ve found 5200 holding hoses in place. Can you tell us if it’s hard but flexible?
 
Since they used it everywhere else I'd guess polysulfide caulk a.k.a. Thiokol. Still available from Boatlife.
 
I just got back from visiting a fellow Hatteras owner who is replacing his headliner material. I checked what was used to hold the wiring in tact and it was 5200.
 
5200 is great stuff if you never plan to have to take it out or remove anything it's securing. Over the years, as I've had to remove things I thought were permanent, I've used it less and less. It CAN be removed, but it's not easy. It is very good for installing through-hulls, though.
 
The grey putty that Hatteras used around all of the wiring is just Duct Seal. You can buy it at Home Cheapo or any electrical supply.
 
Home Depot and Lowes call it plumbers putty. I used it to reseal wire runs in my FB from helm aft.
 
Home Depot and Lowes call it plumbers putty. I used it to reseal wire runs in my FB from helm aft.

perma gum and plumbers putty are a bit different. Permagum is more elastic and sticky. Similar to bedding tape. Plumbers putty will crack if left to dry but works better in contact with water
 
perma gum and plumbers putty are a bit different. Permagum is more elastic and sticky. Similar to bedding tape. Plumbers putty will crack if left to dry but works better in contact with water

True. Its not the same. Here is what you want:

https://www.lowes.com/pd/IMPERIAL/5013767565

60125037.jpg
 
I can’t imagine it was 5200 it takes forever to dry and you’d need something else to hold the wires while it did
 
I used the duct seal and it did the trick. Thanks for the info.
 
Here are some photos of 5200 used in these wire runs. It’s very stiff but flexible just like 5200.
 

Attachments

  • IMG_8583.webp
    IMG_8583.webp
    18.2 KB · Views: 25
  • IMG_8582.webp
    IMG_8582.webp
    14.9 KB · Views: 24

Forum statistics

Threads
38,153
Messages
448,692
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom