Possible ID of 120v bow davit? 1988 52c

[Eddieclemons]

Thanks for all responses.

 

[Captain Ralph]

Yep, I would call that a MarQrap davit.
Under that back access cover should be a decal with some numbers, that is your serial number.
Call MArQrap with this number.
Good luck. Only one contact, he may get back to you.
What problems are you having?

 

[Eddieclemons]

None currently, but on my 2021 survey it acted up. The current motor, relay, and controls are available on Etrailer as Dutton Lainsing 120v 7.7 amp. Mainly trying to get a capacity rating.

 

[Eddieclemons]

It looks like the MarQ 600

 

[Captain Ralph]

Measure from the lift back pin to the pulleys pin. Pictures and this measurement will help I D this with MarQrap.
100 to 120 inches makes it a 1000lb or 1500lb lift.
Again what problems are you having.
I have good used lift and winch 1500lb, 120 inch long cylinders and a new 1000lb winch cylinder on hand now.

 

[Eddieclemons]

That pic upload is grainy, the lines are more like the Tenderlift Classic. I will do some measuring and inspection later this week.

 

[SKYCHENEY]

I had a Nautical Structures 600lb that looked much like that.

 

[Eddieclemons]

Well I believe the Davit is a UMT unit, not sure which model. I did find a sales brochure on board with a few handwritten notes.