Oil pressure shutdown for NL Genset

[doc g]

Anyone have a source for an oil pressure sender. This is for shutdown in case oil pressure drops. The one that was in there is marked TR,431,0.2,P1.0. It is steel with 1/8" npt thread and bakelite center . Wiring goes to the center. I believe it is a normally open switch as I disconnected it and the genset still runs. Oil pressure on the gen is 60 - 80 psi. Any help would be appreciated!!!............Pat

 

[TedZ]

I like these guys a lot.

http://www.egauges.com/vd2_main.asp Look at "senders" at the top.

Forget the 1/8" pipe if it is not available. A nipple and a reducing coupling makes it what you need.

Ted