Hows Hatt
Member
- Joined
- Apr 15, 2005
- Messages
- 44
- Hatteras Model
- 28' SPORT FISHERMAN (1965 - 1966)
....... I've been playing around with laminating some teak onto the bow of my run-about. As I was wet-sanding the teak, I noticed that several strips had partially de-laminated. And now there is water underneath the teak. Any ideas on how to dry things out? And how to get some epoxy in there?
And this is Hatt specifc - My 28' SF project boat had teak on the gunnels, most of which is now missing. The remaining strips are glued and screwed with plugs to the fiberglass. Any ideas on how to remove the remaining teak?
Thanks for any ideas. Howard in Michigan
BTW - If you know of any Hatt 28's in your area, please let me know. To this point, I've compiled a list of 23+/- owners.
And this is Hatt specifc - My 28' SF project boat had teak on the gunnels, most of which is now missing. The remaining strips are glued and screwed with plugs to the fiberglass. Any ideas on how to remove the remaining teak?
Thanks for any ideas. Howard in Michigan
BTW - If you know of any Hatt 28's in your area, please let me know. To this point, I've compiled a list of 23+/- owners.
