No flex - First Time

[JLR]

I plan on using this in the holding tank for the first time. I do not plan on using it in my fresh water heads. Do I just pour some down the deck pump out fitting and add some water? It is not critical so I surely do not want to do any damage. Thanks.

 

[KPTIM]

Just flush it down the head.
The residual that stays in the hose from the head to the tank will benefit from the NoFlex as well.
Just follow the recommended dosage on the label.

 

[racclarkson@gmail.com]

Flush it. Spray odorgone on outside of hoses for best results if hoses stink.

 

[wpc691]

Per Noflex directions, I put a little in each head every day - they say a tablespoon, I put in about a teaspoon. When I first started, I did put in a tablespoon every day for a week, then pumped out. I put it in both our fresh water and salt water head. I read advice to start up by dumping an entire bottle down the pumpout fitting, but I chose not to do that. I also use the Noflex as bowl cleaner - wet the bowl, sprinkle some around, brush, flush; seems to work great.

 

[wpc691]

Flush it. Spray odorgone on outside of hoses for best results if hoses stink.

2x on Odorgone too. I bought a gallon after Robert recommended it about a year ago. It works better than anything I’ve used. I spritz a little around the interior spaces, bilges, etc once a week.

 

[34Hatt]

I was using No flex but from a recommendation here I tried Nutralizerx and I think it works better and you use less I just order my second order.

https://nutralizerx.com/