Need Northstar Antenna Coupler

[Pete]

Searching for a good Northstar 8410 antenna coupler for a differential antenna. The 9XX series (941XD, 951XD, 952XD,.....) use an antenna coupler to hold the 4 foot whip antenna in place. It provides the front end of the DGPS receiver and is an absolute requirement to have an operational unit. Mine has gone to the great beyond and they are not available new.

So, does anyone have or know the whereabouts of a good 8410 that is available? Your help would be most appreciated.

BTW, I will also check with Outer Banks Electronics tomorrow.

Pete

 

[GCSI]

Pete: I do believe that I have a few on the boat. Send photo of exactly what you need.
Brett

 

[Pete]

Pete: I do believe that I have a few on the boat. Send photo of exactly what you need.
Brett

Here is a picture I pulled off an old ebay listing, as mine does not have the label and was refinished.

http://www.samsmarine.com/forums/attachment.php?attachmentid=23288&stc=1&d=1504527054

Thanks

Pete

 

[GCSI]

Pete: I think I have two of these on top (from previous owner), I'll clamber on up next time I'm at the boat and report back. Could be a week or so before reporting back.
Brett

 

[krush]

I think I have some of this old Northstar stuff lying around that I took off. I also have some old GPS/plotter units I yanked out. Not sure about cables, some were cut.

 

[Pete]

Brett, Krush, thanks for taking the time to check out your inventory.

Pete

 

[krush]

This what you want? I also probably have the antenna somewhere, maybe?!? I have a bunch of other old stuff. I have to snap some pics

 

[Pete]

That is the base that attaches to the inch and a quarter antenna mount/extension. The part that I need is the top section that goes into the non metal end of what you are showing and has a 3/8" top female thread. I have the 4 foot whip antenna so I do not need that. If you take a look at the picture I sent what I need is the top section with the Northstar decal. But, if you have the matching top, I would like both pieces for cosmetic matching reasons, as I refinished mine a slightly different color.

Thanks

Pete