Micro-aire easy touch display lost

[ageless]

Marina decided to manually move our vessel, disconnection shore power while all the units were on (not happy about that). Upon returning to the vessel the salon AC control unit is not working, nothing at all. Swapped it for galley and display is operational. Anything other than the cord that could cause this? Condenser has power to the board.

 

[MadHatter53]

If I read correctly you tried the salon display in the galley and it worked good. Is there a fuse somewhere for the display power? Not sure why they had to move your boat or if that had anything to do with the display issue.

 

[captcrunch]

Do they look like this? Is you need a new board you’re welcome to one.

 

[ageless]

this is the unit I have--no idea regarding a fuse, not sure how one would be installed inline

https://www.micro-air.com/products_groups_easytouch_control_displays_microair.cfm

 

[captcrunch]

You have the retrofit kit. I have the box and display too trying to sell

this is the unit I have--no idea regarding a fuse, not sure how one would be installed inlinehttps://www.micro-air.com/products_groups_easytouch_control_displays_microair.cfmhttps://www.micro-air.com/products_groups_easytouch_control_displays_microair.cfm