Free - Water Temp Gauges and 2 Fuel Tank Senders

[Timm]

The PO installed a set of (FloScan's) Dual Scan engine gauges both at the lower and upper helm. At the lower helm, they left the original engine temp gauges which were disconnected.

I decided to replace the mechanical fuel senders for the forward and aft tank and installed newer electric style. I pulled the water temp gauges and installed fuel gauges for those 2 tanks in their place.

So, I am offering the 2 water temp gauges and 2 mechanical senders free to anyone that might like them. You'd need to pay shipping from Northern California.

The senders work fine and as mentioned above, were for the forward and aft tanks on a 1978, 53' YF. The length of the senders are 20.75" and 22.75" and have standard pipe thread style fittings.

I assume the gauges work but can't confirm since they were already disconnected when I purchased the boat. The chrome bezels are in very good condition (no pitting) as is the background and number/lettering printing.

Anyone interested go ahead and send me an email to: iamgreek@comcast.net

 

[Bob Bradley]

I could certainly use the water temp guages. PM me the shipping costs and your address and I'll do the same. Thanks.
Bob

 

[hcalmar]

Also interested in water temp gauges if not called for.
Hal

 

[Timm]

The gauges are gone.