Capndan
Member
- Joined
- Jun 12, 2010
- Messages
- 40
- Status
- OWNER - I own a Hatteras Yacht
- Hatteras Model
- 61' MOTOR YACHT (1980 - 1985)
Taco Marine A11-0152TAL12D-A Aluminum Rub Rail, Drilled, 7/16"W X 1"H X 12'L
10 12' sections bought to do the 1" J trim that goes around the bottom drip edge on the flybridge cap on 80s and some 90s boats.
This was enough to do a 1985 61MY.
Located at the Venice Florida Airport. They are 12' long so shipping gets expensive. They are
still in a shipping tube and wrapped. p/u preferred
Retail is $136.41 a piece
SOLD SOLD SOLD
.
10 12' sections bought to do the 1" J trim that goes around the bottom drip edge on the flybridge cap on 80s and some 90s boats.
This was enough to do a 1985 61MY.
Located at the Venice Florida Airport. They are 12' long so shipping gets expensive. They are
still in a shipping tube and wrapped. p/u preferred
Retail is $136.41 a piece
SOLD SOLD SOLD
.
Last edited:
