Fleetguard fuel filters

[Banshee36]

Jim,
You put the Seabord system on the BlueNote, got any pics as how you installed them. I currently have the Racors mounted in the center aft bilge area and I am going to have to make a bracket to mount my new filters. Just looking for a few ideas. Have to replace all the injectors on the cummins and want to install the new fuel filter system at the same time.
Thanks,
JW

 

[jim rosenthal]

JW, it would be easier to see the boat, since you are local, but I will email you a photo that shows them. I had to have brackets made up to hold them.Send me a PM if you want to see them, the boat is in St Margaret's.

 

[surfdancer45]

JW: I put in the same system on my 36. The space on the rear engine room wall, as you know, is tight. I already had my oil change system and some electrical boxes mounted there. I put the bulk fuel seperators on the front side of my fuel tanks under the hatch in front of the entry door. I mounted the fuel manifolds and 1000s with gauges in the engine room. This has worked out well for me. Easy to change the bulk seperators (you change these 3 times as often as the 1000s) and keep the rear engine room bulkhead relatively neat. I will take some pictures this weekend. Bob

 

[Banshee36]

The Space out in front of the door may be the spot. I can take out the Alge x's and install the filters there.
Thanks,
JW