College Funding......lots of stuff for sale !

[Starman]

My daughter has made up her mind to attend graduate school after she receives her bachelors degree this December.

So I decided to start the college funding by cleaning out some things I have acquired over the years.




Email me at Starcarpentry@hotmail.com , send your zip code so I can figure the shipping costs.

I can take CC by phone also.



Lot 3

2 rolls of 8 awg tinned copper , approximate total 100' ( these were also 100' rolls )


75.00

Lot 7

RG59/U 22awg coax ( maybe 150' ?? )
RG 8/U 13 awg coax approximately 50'

Price cut.......30.00

Nice a/c vents . Aluminum

I have 4 @ 40.00 each ( selling individually )

 

[Starman]

These came off Boss Lady. They have the pedestal mount, but not the slider. I have the pedestals also 12" .

The cushions are ugly and need replacing . The aluminum pedestals work but need some cleaning.

Both chairs w/ pedestals 100.00

These are Racor fuel filters.

Selling 2 pair as shown ( 4 filters )

800.00 total ( owned by Chris: Boss Lady )

 

[Starman]

More stuff.............

Lot 10

Vents:

Kind of Off white wood vents with metal louvers.

Will sell each.

Lower prices

12X5 opening 2 @ 10.00
12X5 opening 2 @ 10.00 ( split directional )
4X10 opening 1 @ 8.00
4X24 opening 1 @ 15.00

Lot9

Fiberglass table. ( no pedestal )

25.00

Lot 10

Bomar round hatch. It is used, but in excellent condition. ( has some caulking on backside that needs to be cleaned up )

19 1/4 outside diameter

50.00

 

[mopester]

Paul, i sent you an email.

 

[Starman]

New items


Fiberglass Table. Sold





These are two aluminum 12VDC lights, each with an on/off button and each will swivel.

The size is 4" X 8 "

Price for the pair........20.00

Engine cover vents . Stainless, brand new , fits opening size 3 1/4 by 10 1/4

Price........20.00 for the pair

I also have several boxes of Teak/afromosia/ oak/ ash/ mahogany veneers. Some with paper back, some with sticky back. Mnay different sizes.

I will try and sort them out this week sometime if anyone is interested.

 

[Starman]

More items from the ole' shop !!

4 Teak steps approximately 21 X 5 X 1

selling all 4 as a lot

50.00

This is Quarter sawn Teak veneer. It has a sticky back ( 3M peel and stick )

I have 4 sheets of 2' X 8 '

30.00 Per Sheet

These are new garelick poly steps ( never used )

all 4

30.00

 

[Starman]

I have 3 lights ( never used )

120 volt/ heavy plastic cover / fluorescent bulbs ( I do not have the bulbs )

20.00 each

all 3 for 50.00

These are 12 volt florescent lights. I do not have the bulbs.

Looks like they have never been used. The on/off switch is located on the end cap. 36" long.

40.00 for the pair

 

[Starman]

These are some stainless Fast Eye Snaps. Size 1

4.00 each

or

5 for 15.00

Hoping I do not break any rules with these next two items.

If these need to be removed by a moderator, please do not hesitate to do so.

These are new and my distributor is not going to be carrying these items and they had a great close-out price and thought I could pass along some savings. So if any one is interested........

Samson dock line

20.00 each ( I have 6 ) ( SOLD )




The other item is the perko Sidelights. 24 volt. Each light has 5 LED's and these things retail about 160.00 a pair.

Will sell for 50.00 a pair.

 

[richardoren]

Re: Dock Lines

Hi Paul,

I'd like to buy your 6 dock lines, can pay by paypal or whatever means you wish.

Will PM you now - thx

Richard

 

[rswirtz]

Paul, If Richard doesn't grab all 6 of the dock lines, I would like 2.

 

[SKYCHENEY]

I like those 120v flourescents. I need a couple for my engine rooms. But, I think I could use bigger lights. What is the brand on those?

 

[Starman]

I will check on that Sky and get back to you , maybe this evening.

Sky,

The tag says :

All-Brite Light co. Reading, Pa.

I can tell you these lights came from the old carver plant in Rocky point nc. I have used/sold a couple dozen of them over the years. I have these 3 left.

So brand new , no boxes though.

 

[41-Hatteras]

DO you still have those racor's if o how much. Also the P/S LED running lights

 

[Starman]

Yes,

I have the lights.

 

[Starman]

Chris ( Boss Lady ) and I have 7 sheets of the 1" divinycell 48 X 85

It is the H60PL100 48 X 85.6 (approximately 28 square feet per sheet )

We will sell it by the foot for 7.00

So if you need small pieces of this material, I will cut to size and ship.

This is fantastic material for ice boxes, fish boxes, tackle centers and is structurally strong.

I built the lift rails on Boss lady using this material, and there is enough in these 7 sheets to complete another set of lift rails on a 48-50ft boat.


Just send me an email or Private message

 

[mopester]

Paul, i built my old aft wood rails out of divinicell. Are they 4x8 by 1inch thick? if so can you give me per sheet price. I have one more project which i could use these on. (most likely all) This is very strong stuff when matting and roving etc applied over it.

Mike.

 

[Starman]

Starboard Scraps

Well nothing is really scrap when it comes to boat materials. But I have several pieces of starboard in varying sizes

Good for many of those small projects on the boat.



Black

1X5X12 (12) 4.00 EACH

1X5X8 (4) 3.00 EACH



3/4 X 8 X 11 1/2 (1) 5.00

3/4 X 12 1/2 X 22 1/2 (1) 10.00

3/4 X 5 X 14 1/2 (1) 5.00

3/4 X 2 1/2 X 12 (1) 2.00


1/2 X 7 1/2 X 15 (1) 6.00

1/2 X 3 1/2 X 8 ( 5 ) 3.00 EACH

1/2 X 10 X 18 (2) 10.00 EACH


White

3/4 X 12 X 11 (1) 8.00

3/4 X 9 X 19 (1) 12.00

3/4 X 10 1/2 X 9 1/2 ( 2) 10.00

3/4 X 12 X 15 1/2 ( 1) 11.00

3/4 X 13 1/2 X 17 1/2 ( 1) 12.00


1/2 x 14 x 16 (1) 10.00

1/2 x 14 x 18 1/2 ) (1 ) 11.00