Cockpit Carnage......

[Capt. Tobb]

Thats not a bad idea, I list to the port because of jenny and that is where the problem is. I will need to figure out where to drain to...

 

[Capt. Tobb]

Well, I finally finished most of my filling and prep work. I built an enclosure to have a spray booth in the cockpit, I really liked how it turned out

(yes, that is a fine 45C with new Cummins next to me, gotta make sure I dont get any overspray on her)

I built a box with a blower from a 2 1\2 ton AC unit to attach a filter to. On the other side I have a filter attached to clean the air coming in

 

[Capt. Tobb]

The 545 went on Sat and today I started wet sanding with 320. I do have a little more filling to do

Maynard, I did drill a hole in the door track, I will epoxy in a copper tube that will drain into bilge. I think that will work great, thanks for the tip.

 

[SKYCHENEY]

That's impressive. I'm still waiting for it to warm up here so I can shoot some Imron on my power inlet boxes. Good luck and keep the pictures coming.