Anchorlift windlass

[Dreamboat]

" Hatts came with 32-12V converters installed to operate certain 12V systems that were oem on the boat so that's not a big deal to either tap into one of them - if sufficient amperage is available or add another one. I added one to power a new 12V Garmin radar a couple of years ago when I replaced the 32V Raytheon. But our chartplotters run from the oem Hatt 32-12 converters.

.

I don't want hijack this thread, but have a quick question for MikeP: Where would I find that 32-12V converter on my 53MY that you speak of?

 

[SKYCHENEY]

I don't want hijack this thread, but have a quick question for MikeP: Where would I find that 32-12V converter on my 53MY that you speak of?

I have seen the Newmar transformers mounted in one of the engine rooms or under the helm.

 

[MVCaprice]

To folks that are considering a 32v to 12v converter for a windlass keep in mind that these windlasses are very high current and you would need a large converter...think 50Amp + . That would not be cheap!