Aluminum radar mount

[dougl33]

I'm selling an aluminum radar mount. It was used on my boat for one season but due to the fact that my radar is mounted at the back of my hardtop I had to change it out. It wasn't tall enough to see over the front edge of the hardtop, though it did allow me to see the perfect V of my wake!

It was used for an 18 inch Raymarine Dome. The bottom is 3"x4" and the base to mount the radar is 11"x7.75". There is a wedge but I'm not sure what the degree is. Its 4" high on one end and 4.5" on the other.

$85 plus shipping from Massachusetts:

 

[dougl33]

Reduced to $60 plus shipping from Mass.

 

[bigbill]

doug, is it custom made, if not what brand is it? will it work with a garmin 18 inch dome? thanks, bigbill

 

[dougl33]

Bill,

I don't think its custom, but I don't know the brand. If you know the dimensions you need I can measure and get back to you.

 

[dougl33]

Sold!