AC source selector switch doesn't engage.

[Eddieclemons]

I noticed sometime back periodically on one leg of power when switching from Shore power to Generator source the switch wouldn't stick on the 1st shot. Now it has gotten worse may not engage after several trys almost every time. It is repeatable with all loads off, I even tried it with shore power and generator off and it still fails a time or two. Thoughts?

 

[Eddieclemons]

I am assuming no one has one of these selectors they would like to part with?

 

[Captain Ralph]

Look on the breaker faces. Amp ratings are on the left / right breaker groupes. Sam's has a few on hand. There is a minimum order from the OEM (Airpax). I have to order 3 to get one that is not stocked. If your numbers are close, I may have a deal for you.

 

[Eddieclemons]

Look on the breaker faces. Amp ratings are on the left / right breaker groupes. Sam's has a few on hand. There is a minimum order from the OEM (Airpax). I have to order 3 to get one that is not stocked. If your numbers are close, I may have a deal for you.

70/50 Left to Right is what I have???

 

[Captain Ralph]

I'm considering having 80/60s with slide power selector built for a friends boat.


Like this one

http://parts.samsmarine.com/PartSearch/LinkPart.cfm?ItemNmbr=27039

 

[Captain Ralph]

Here is your switch. Four available.

http://parts.samsmarine.com/PartSearch/LinkPart.cfm?ItemNmbr=27030

 

[Eddieclemons]

Thanks Capt, it's looking like a solid boat dollar to get that thing to Nashville.