AC drive pressure gauge

[eze2bme]

Does anyone have a working transmission oil pressure gauge (AC) that they aren't using or needing? Need 12 volt 0-400 psi for Twin Disc MG506. Thxs.

 

[Glory]

If you can't fine the AC Stuart warner make s one.

JM

 

[fissioneng]

Does anyone have a working transmission oil pressure gauge (AC) that they aren't using or needing? Need 12 volt 0-400 psi for Twin Disc MG506. Thxs.

Sounds like we have different sides to a similar problem. I have 2 working AC gauges on my MG506, but broken senders. I plan to change them all out with VDO for a fraction of what CAT wants for the very unusual sender. I can't find its specs anywhere on the aftermarket.

If this rises on my to-do list, and you still have a need, I'll let you know. However summer is here in Virginia and my to-do list progress slows way down about this time.

 

[eze2bme]

Thanks "fissioneng" but I don't think that yours will work as I assume that you have a single bridge station and not dual (lower & flybridge). Steve McP at Sam's says that the dual station gauges are different from the single station and are not interchangeable. I need a dual station gauge.

 

[fissioneng]

Ah, didn't think about that, you're exactly right. I only have a single station.