1965 50MY Mahogany Mast support fittings needed!

[Pettigrewr]

Hi Everyone,
Need some help finding support eye end cap slip fit fittings!
In particular, the chrome plated bronze fittings on the end of each support rod that leads from the roof of the boat to the mast. They look like miniature bimini top fittings.
The fittings have 7/16" inside diameter holes for the chrome plated rods. the fittings also have set screws like bimini top fittings. First place a called was Sam's marine = NOPE! and no suggestions either! HELP!

 

[Captain Ralph]

You do not have them or yours were damaged?

 

[Pettigrewr]

Mine were damaged.
The eye portion on two broke off, don't have the pieces.

 

[Captain Ralph]

Mine were damaged.
The eye portion on two broke off, don't have the pieces.

You may need to search for a brass/bronze tech shop that that can rebuild what you have.
It is not a hard job, just finding an old school guy to do it.
Hy tech has f'up so many good trades.
If you find a shop that can fix it, please let all know.

 

[Pettigrewr]

Thanks for the advice,
Will do and will pass on to all if I find one.