Search results

2012 Williams Turbojet 385, INCLUDES Trailer and Factory lift harness (for use with dinghy davit if used as yacht tender). Just completed a $9,100.00 MAJOR service by Williams - included oil change, new oil & fuel filters, new spark plugs, new battery, bilge pump, engine diagnostic, valve...

This is a 32V>24V step down DC DC converter rated at 25 amps. It was working when removed, no known issues. The unit is labeled "32-12-25" but has two stickers that say "Newmar Factory Modification", and "32-24-25". Of course the stickers were on the side and back of the unit and not visible...

I’d like to get someone that is well-versed in Classic Hatteras to come on board for a preliminary assessment (I’m willing to pay for the time) to determine feasibility and some basic ideas on the following: - repower with something that will cruise occasionally at 20 knots, but primarily 10...

Hauled out on Monday for bottom job, exhaust hammer collector replacement (with fiberglass) on 8V71TI’s, Stbd side rudder table repair (water intrusion around the post rotted the wood), oh, and hopefully waste treatment upgrade among many other smaller to-dos. We dropped the stbd side rudder...

Hello all, would sure appreciate any thoughts. I can usually tackle basics but this one has me perplexed. We installed a Xantrex 3000W inverter with a 24V battery bank on Sea Joy over 2 years ago. It has worked extremely well, and as we are anchoring out more often it was a very important...

Maybe too much spare time - to ponder appliance ventilation in enclosed cabinets? After a few years of observing the aft deck icemaker struggle on warm days I decided to install a fan to augment the air flow into the front, and another smaller fan to pull the heat out of the back of the cabinet...

Just got diver report. Starboard hull Zinc is still like new (not good) so it is bad connection. Problem is the watermaker is installed on a new shelf that covers the whole area. Will have to move the water maker and the shelf it is bolted to for access. Port side hull Zinc is down to 10%...

Had a new bronze unit installed less than two years ago and the temperature is now reading 130°. Worked perfyuntil about a month ago, then suddenly almost 50 degrees high. Anyone else have a similar issue? Thanks

I have 2 sets now for 13’ Whalers. One for old style hull (paid $400ish), and another new set from UMT (paid $1100ish). Old set is at yard storage near Ft Myers. New set is in Palm Beach Gardens near my boat. Would love to find a new home for either or both. Any reasonable offer...

Went the past 2 days, wow, always an experience. Here are a couple pics. Toured the new Hatt 90 MY. One pic from the bridge. Then they had to shoo us away for a real potential buyer, which we were fine with. Also, an early 1990’s 92’ Hatteras fishin boat! Asking $1.5M through Allied. So...

Hello, I bought this in September 2017 and never installed it. We moved from gulf coast to southeast coast FL early this year and miraculously the Wave Rogue Pro I was going to replace has been working almost perfectly over here. This unit came highly recommended by members of this forum...

AC is working well for the most part, but occasionally firing the HPF and auto shutdown. I would like to monitor the 5 condensers pressure from the various N2K displays on board.I have the Maretron FPM100 module and 5 pressure transducers. These have 1/4” NPT male (photo attached). Can...

This ones for you Scott. It may already be common knowledge but the first I am seeing it. Supreme Court overturns physical presence requirement for sales tax collection...

You have reached the 'Men's Help Line.’ My name is Don. How can I help you? "Hi Don, I really need your advice on a serious problem. I have suspected for some time now that my wife has been cheating on me. You know, just the usual signs: The phone rings and when I answer, the caller hangs up...

I've decided (very reluctantly) to sell the Whaler. too many close calls with the engine protruding over the starboard side. Icing on the cake was the lock with the 14' drop coming over to east coast FL after crossing the Okeechobee last month. Excellent condition, less than 200 hours...

Has anyone installed the Masterbus NMEA 2000 Interface? If so, would appreciate any insights into configuring it to work with displays on N2K network. I have the Mastervolt PowerCharger 40/12-3 and would like to get the charge status, etc up on the FB helm. Specifically, I'm also curious if...

There are 4 pull switches (2 for Bow, 2 for Stern Dock Lights) on each helm. The bow lights, although not very bright, work fine (actually helped us dodge several dozen crab pots one night in the Gulf). The 2 stern dock lights are not there and must have been removed? Can anyone please...

Here is a pic.

I always add about 3/4 cup of household bleach when we fill fresh water tanks. 300 gallons is the water capacity. Sometimes white foam bubbles out of the vents as the approach full. Anything to be concerned with? We do drink the stuff daily after 2 levels of charcoal filters.

Funny, we picked the same two vendors (Glastop for sofas and Release for teak tables) after seeing them at FLIBS. We had similar great outcome, very happy with the results. The sofas and the Ultraleather are really amazing. The extra storage is huge.