Search results

I have 4 of these horns two 19" and two 16" They most likely came with the boat in 1976. They are corroded and need re-furbishing but made be fixable. But I have no idea is they are Buells or someone elses. Any help, Thanks Skooch Morehead City NC

Sorry I am not a detail guy. . . . but we are back in the Chesapeake Bay on the Wye river. The Summary of the trip: We left Mid Sept. to Jerrett Bay for fix'en lots of stuff including a leaky stabilizer. First day out blow out a hose on the same stabilizer we fixed. Got that done but were late...

Anyone have a good experience with a insurance surveyor for an old Hatteras LRC. We will be at Jarrett Bay in a few weeks for our 5 year insurance checkup and some work. Always some work. David Skooch Wye River MD

The rear seal on my port 6-71N is leaking into the Allison M30 transmission. It's now decided to leak enough to over fill the transmission fairly quickly (an hour or so). I don't know if I can run it very far. I am going to Jarrett in Sept. but thats a few hundred miles away. Any idea on bad...

We installed a new pulpit (rotted and crooked) and windlass last year. The pulpit came from Slane and windlass is a Maxwell RC12-12 for 1/2 chain. Jerrett Bay made a stainless shut to funnel the chain fairly close to the center of the chain locker. Works gr8 and is faster and stronger than the...

This was a spare charger. G330-3NL 115VAC 30AMP 32 volt Sentry Charger. $350 plus shipping from Philly area about 35 lbs. Contact David Stahl mv Skooch dot com

Both anchors painted white and in very good condition. Not used since 2000. Not bent in any way. 35 HT Danforth New cost $350 - How about $150 plus shipping 45 CQR New cost $800 - How about $400 (the older ones are better anyway) Anchors are near Philly but I do drive to Eastern NC regularly...

I have a SEA 222 SSB radio ($300 obo) and a recently refurbished Digital SEA 235 SSB radio ($650 OBO). Both with Tuners. SEA is still in business in Seattle Washington and they are very friendly to work with. The Digital 235 was refurbished and tested fine at the Seattle factory last year and...

Vertical Ideal Windlass model BHW 32 Volt 1/2 gypsy with rope drum capstan on top. 1976 vintage and is worn and scratched but works great. New its $7K. Complete re-build with new chrome est. $3500 from Ideal. Check out idealwindlass.com for details. Windlass is uninstalled and disassembled and...

Here we go. Pulpit is ready for the Jarrett Bay guys to remove. Only two 3/4 bolts left to get out and cut the thing off. New pulpit is in stock and I pick up the windless at West Marine tomorrow. Old huge 32v windless with 1/2 inch gypsy will be for sale on HatterasLRC.com then this site...

The project has begun. We took Skooch to Jarrett Bay last week in the fog and cold. The bottom looked bad so we are going to blast the old anti-fouling off to good tie coat and build it back up. Big dirty and expensive job. But needed. The bow pulpit is waiting at Slane's place for me to pick...

The bow pulpit on my 58 LRC was broken twice on her circumnavigation 1998-2004. It was repaired poorly. It seems strong enough and we have used it for a few years now, but it was repaired crooked and it bends down past the hull jiont instead of up. The Ideal windless works but looks badly worn...

My 1976 58 LRC has a small cockpit with two large hatches. When it rains real hard like all of June here in the Sassafras the hatches leak enough to fill the bilges so the pumps go on. The small 3/8 hole drain in the trough around the hatches does not seem to carry off the water. They are clean...

For Sale. We have a pair of Naiad 6 1/2 square foot fins in very goiod condition. They were removed from a 58 Hatteras LRC to install 9 sq. ft. fins. Fins will fit Naiad systems 170 to 250 series. Super upgrade for 1510 motor yachts that have 4.5 fins! Located Fort Pierce Florida. Asking $1500...

New Price $125,000 ================================= 1980 42' Mark II Hatteras Long Range Cruiser “Skooch” is an updated, low hour, efficient, stabilized Hatteras Mark II LRC and ready to cruise. We are selling the boat to move to a larger LRC. Highlights: New (2010) NorPro 9KW Generator...

Pipewelder 1200lb electric davit. Golo 110v electric winch. Standpipe. All in good condition. Asking $2900 OBO. Located near Kent Narrows Maryland Contact Fred Kirsch 410-827-8827; 410-490-8530

We have two pair of 6.5 sq ft NAIAD stabilizer fins for sale. We replaced them on two 58 Hatteras LRCs with 9 sq. ft. fins last winter. THe 6.5 are great for Hatt 48-53-58 motor yatchs that go a little faster. If want to move up from 4.5s or have a damaged fin. Please contact David Stahl...

I thought a new thread would be in order and bingo a friend on Wall Street sent me this letter to the occupation movement. Quoted Letter We are Wall Street. Its our job to make money. Whether it's a commodity, stock bond, or some hypothetical piece of fake paper, it doesn't matter. We would...

I mean 58 LRC. Does anyone know this boat. Just when I thought I bought the most beat up Hatteras this comes along! But may be its not to bad and is a great deal. Frank Gordon gives us little to work with. 4 Staterooms with heads? The fourth could be the pilot house. YW# 2584 2376210 1976 Hatt...

When I bought my LRC the Stb. 6-71N was leaking a qt. per 1/2 hour from a tin valve cover. The PO had purchased 2 cast valve covers from an engine junk yard in Miami, but could not get them on the motors because they hit the thermostat housing. When I took over the project I too found the covers...