Search results

I have a set of old style stainless Hatteras logos that were laser cut from stainless by Dix Metals. They are a 1/4" thick and are made from 316 Stainless. I welded stainless studs on the back which can be used to install them or you can grind them off if preferred and surface mount them. They...

I have a few questions on main engine accessory drive belts. The belts on the mains were shedding a tad so I am replacing them before the boat heads north for the summer. Also, I am not sure that the previous owner used the right belts so i am looking into better solutions and possible upgrades...

The WEMA sensors fit good and come in variable lengths / custom length so you can tailor them to your tank. If you want to move away from the mechanical stuff this is not a bad way to go. www.wemausa.com/sensors/level-FuelWater.shtml#S5U

Has anyone tried a dish network receiver other than the 211 with a KVH m5/m7? I want pause and Dvr functionality onboard. I have heard that the 211 can support a hard drive with some of that functionality but haven’t tried that yet.

I thought I already posted on this some time ago but couldn't find it. Sorry if this is a dupe. I am trying to understand what my options are for getting a quieter 24000BTU variable speed fan/air handler in the Salon. We currently have a two speed motor which I recently converted from a two...

I hear you. The clocking of the gaskets is key. Once the bolt holes are lined up you are good. What I did was test fit them to look for fitment prior to using gasket tack to make sure the clocking is correct. Unfortunately, The first leak I had was around the bolt holes. There was a depression...

Recently I had the heat exchangers out of our 12v71's for cleaning. When I put the HE's back in I changed the glands, orings and all gaskets. After running a bit i started to see salt weeping coming through the orings and glands on the HE discharge side on the port engine at higher rpm. In...

Good topic. A year ago I ordered a bunch of the trim for ours. Steve told me they no longer have grey so I ordered black. I ended up not using it though as the local window guy used urethane instead. He has done a handful of boats like this up here and it has stopped the leaks. Here are some...

Has anyone had success with buying premade tranny cooler lines? The last time i had to get some hydraulic lines made locally it was close to 2k. I am hoping to fine some lines for our dual cooler / MG514 out of the box that are the right lines that aren't 30$ a foot overkill 5 layer hydraulic...

I have 75' of the black window trim: http://parts.samsmarine.com/PartSearch/LinkPart.cfm?ItemNmbr=58156 . It's a single uncut section. We ended up using urethane instead at the urging of a local shop. Make me an offer.

Does anyone have experience with AMI Membranes? I am looking at replacing our Sea Recovery membrane soon and was curious if anyone has used this brand. This is the specific one i need: https://www.wateranywhere.com/3-x-40-1200-gpd-seawater-ro-membrane-for-sea-recovery/

Does anyone have a source for 3/8" Afromosia Wood Plugs? I have been working on redoing the counter top in the pilot house and need to replug the trim afterwards.

Or you can do it the hard way and take everything apart and then paint it :) So when you are using aircraft stripper do you literally wash it off with a tsp water mix, dump it in the pan then scavenge it up? Or are you wiping it down? I am very curious logistically. I need to go this on our...

Yes it has the rubber caps. I guess i didn't realize the he tube comes out that easily. That is awesome!

Has anyone figured out the easiest way to clean out the HE on their Northern Lights 16-20k 844 based gensets? It looks like the HE is soldered into the exhaust manifold so it needs to be removed in one piece. The temps have been creeping up a bit and I want to give it a HCL/Oxacylic flush to...

Well the HE's cleaned up good! I am thinking that i will use "high tack" along with the paper gaskets to seal her back up. Any suggestions?

Looking for 4 FX1 boards, control boxes and thermostats. If you have some and want to sell them PM me.

I actually found there are 8 drains. There was an additional drain at the bottom of the transmission / oil cooler unit. A couple of the drain cocks were failing so i bought replacements. I am also doing hoses at this time as some of them looked horrible. I decided that i wanted to pull, inspect...

I recently picked up some afromosia veneer off of ebay and had some good results that I thought would be worth sharing. The stuff I bought was 32" x 11.5" didn't have sticky backing and was 25$ shipped. Seems like there is quite a bit out there right now for very little $$ so if you need to...

If this happens i would recommend switching to LED's. I have found some that are very close which i have used on the bridge bilge lights with resistors. I just soldered in some resistors and wire so i can replace them as I go. Here are the Mouser P/N's 645-6123132130F MFG Part...