Search results

You disassemble from the back. There’s a pin/keyway that you remove from the shaft then the shaft can be removed.

It looks like you have some VDO gauges Amd some Stewart-Warner manual gauges. You definitely need dual senders to add another set of gauges.

A torch with map gas might get it hot enough. A small oxy-acetaline rig like hvac repairmen use would be the best set up if you can get your hands on one. As far as hose I’ve used heavy duty radiator hose made by Gates or make up an intake pipe out of hard copper. The hose with the wire in it is...

If the mounts aren’t slotted about the only thing you can do is break out the rat tailed file. That’s a suk job but it’s that or re-bed the strut and I’m pretty sure you don’t want to go down that road. I don’t really understand the coupling being out .011” unless they faced the coupling while...

You need to move the front of the engine inboard or the rear out board. Tighten the inboard rear mount so both ends don’t move. Put pressure on the outboard front and bump the inside front engine bed with a drilling hammer and the engine will slowly move inboard. The bottom holes on the motor...

I’m in the process of cleaning out my Dad’s garage. I ran across an autopilot system that probably came out of a 41’ Hatteras double cabin. If anyone has a use let me know. I’m located about 45 miles south of Houston. I will get the model number off of the system this afternoon and update the...

Does anyone have any use for an old auto-pilot system. I can get the part number and pictures this weekend. It came out of an older Hatteras hull. I’m located south of Houston, Tx.

I was cleaning out my Dad’s garage and found a raw water pump and a couple of impellers. It’s the old style pump for the 7.5 kw generators. Onan shows a part number 131-0152 and 131-0182. This is the early style before they switched to the Sherwood pumps. The price is $350.00 with the 2...

This is a photo of a 45’ Hatteras that was stretched 6’. Photo was taken before the molds were built and lined with Masonite. The glass was built up over a 12/1 scarf into the original sides. The stringers were lengthened and tied into the original transom. The running gear was repositioned and...

http://www.ebay.com/itm/2014-Ocean-Alexander-85-Motoryacht-Twin-MTU-1600HP-Diesels-Fire-Damage-Yacht-/191236289433?forcerrptr=true&hash=item2c86923399&item=191236289433&pt=Fishing_Boats I wonder if they sunk her at the dock.

I have a late 60's 41' Hatteras hull for sale. She was a left over winter project from the family boatyard. Portholes and vents have been glassed in. Inside has been gutted down to the stringers and engine beds. Have shafts, struts, and rudders all mounted. The hull was originally a doubly cabin...

http://www.marineauctionservices.com/aucevent.htm I have no affiliation just happened to see the ad in a trade publication. Boat is located in Alabama.

http://www.ebay.com/itm/2001-Trojan-440-Express-Fire-Damaged-Engines-Good-Structurally-Good-Diesel-/171266428337?forcerrptr=true&hash=item27e0464db1&item=171266428337&pt=Power_Motorboats on the wrong coast, but not a bad price if as described

http://www.ebay.com/itm/32V-1888429-Anderson-Remy-Detroit-871-Marine-Diesel-Engine-Starter-Rebuilt-/350611312139?pt=Boat_Parts_Accessories_Gear&vxp=mtr&hash=item51a2100e0b I have no involvement in sale I just thought it might make someone a decent spare and the price seems fair if you didn't...

What happened to REBrueckner