Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

A hull shape I've never seen before

  • Thread starter Thread starter Vincentc
  • Start date Start date
  • Replies Replies 13
  • Views Views 6,152
Vincentc

Vincentc

Legendary Member
Joined
Jun 3, 2008
Messages
1,514
Status
  1. OWNER - I own a Hatteras Yacht
Hatteras Model
43' DOUBLE CABIN (1970 - 1984)
I came across a rather interestingly shaped hull bottom. It looks like it might work well, but the fact that I have never seen this shape make me think otherwise. Any thoughts?

striker profile.webp

striker bow.webp
 
I think it is an old Striker
 
kind of a neat looking boat if you take all that tower crap off the top.

Cheryl
Cinderella
1971 53 MY
 
I thought Jim R. used to have a Striker. Could it be his old boat?
 
One of the worst riding boats I've ever been on! When we were thinking about re powering our 34 we happened to take a trip to Lauderdale that winter. The old man and I were riding around Lauderdale and saw the striker dealer on 84. Had to be 70/71 Strikers were just coming into the country and they were just a super cool looking boat. The old man cut a deal to trade our 34 for the 37 striker. Thank god we had a sea trial and it was a sloppy day. Trying to keep is going in a straight line in any kind of sea except a straight on head sea was near impossible. A floating empty beer can is the best possible description. Endless to say we ran away from the deal!!! A couple years later I mated a few times on a 44 called the "French Leave" it wasn't much better. That boat would become well known when the owners girlfriend disappeared off the boat between Atlantic city And Cape May.
 
q240z said:
I thought Jim R. used to have a Striker. Could it be his old boat?
Click to expand...
No Jim had a 44 besides there are plenty of them out there.
 
Not my old boat, which was a 44. Mine was sold to a fellow in NJ, I think. But I don't think it was the one the woman disappeared off. Wasn't that guy a public official or something, or am I confusing it with something else?

As I remember, it had a decent ride in a seaway, but was cold and damp inside and very noisy- about what you'd expect from an aluminum boat, I guess. Strikers were built by different yards- some in Norway, some in Chile. Mine was made by Fjellstrand Aluminum Yachts in Norway. It was very sturdily built, but really wasn't in good shape when I got it and required a lot of updates. With what I know now I would never have bought it, but I didn't know anything then.

They are tough boats, but any aluminum boat is maintenance intensive and you really have to know what you are doing. I didn't. Rebuilding a metal boat is even more demanding than doing a fiberglass one, and my hat is off to Quentin for what he's accomplished on the Roamer.

Quentin, you ought to tackle a Striker next. A 41 or 44 with a pair of QSM11s would be a real speed demon. Probably almost as fast as a 45 Hatteras with the same engines :)
 
I think the hull form is commonly called "Delta-Conic" and was best developed by a NA named Harry Schoell.

Wide flat chines that run the length of the vessel.
 
Last edited:
He had a restraunt/bar called partners 3 just outside of AC. Growing up running the docks as a dock rat it was interesting to see the wives and kids leave then a couple hours later the girlfriends would show up. Seems it was always the sportfish guys. The MY guys always had some battle axe that never let the poor slob out of her sight.


jim rosenthal said:
Not my old boat, which was a 44. Mine was sold to a fellow in NJ, I think. But I don't think it was the one the woman disappeared off. Wasn't that guy a public official or something, or am I confusing it with something else?

As I remember, it had a decent ride in a seaway, but was cold and damp inside and very noisy- about what you'd expect from an aluminum boat, I guess. Strikers were built by different yards- some in Norway, some in Chile. Mine was made by Fjellstrand Aluminum Yachts in Norway. It was very sturdily built, but really wasn't in good shape when I got it and required a lot of updates. With what I know now I would never have bought it, but I didn't know anything then.

They are tough boats, but any aluminum boat is maintenance intensive and you really have to know what you are doing. I didn't. Rebuilding a metal boat is even more demanding than doing a fiberglass one, and my hat is off to Quentin for what he's accomplished on the Roamer.

Quentin, you ought to tackle a Striker next. A 41 or 44 with a pair of QSM11s would be a real speed demon. Probably almost as fast as a 45 Hatteras with the same engines :)
Click to expand...
 
rsmith said:
A couple years later I mated a few times on a 44 called the "French Leave" it wasn't much better.
Click to expand...

On first reading, I interpreted that sentence to mean something very, very different from what I think you intended it to mean. :p
 
q240z said:
On first reading, I interpreted that sentence to mean something very, very different from what I think you intended it to mean. :p
Click to expand...

You've been in the yard too long!
 
You must log in or register to reply here.

Forum statistics

Threads
38,154
Messages
448,708
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom