Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Which fuse block for hydraulic rams that raise helm?

  • Thread starter Thread starter HP12Sea
  • Start date Start date
  • Replies Replies 8
  • Views Views 25,565

HP12Sea

Member
Joined
Sep 8, 2020
Messages
19
Status
  1. OWNER - I own a Cabo Yacht
Hatteras Model
Not Currently A Hatteras Owner
Which fuse block for hydraulic rams 35' Cabo that raise helm?

Apparently this boat had it replaced and not only did the guy not use the same fuse block, he wired it to bypass the fuse he bought to replace the bad one.

Would anyone know which fuse block or type of breaker should be there as original that mounts there to the left on that platform somehow?

Tried posting pic but can't for some reason. Anyway, it's just to the port side around corner/aft of generator.

Thanks in advance.

J
 
Last edited:
Is this on a Cabo? What year/model?
 
Sorry, rookie move leaving out that critical info.

Thanks for responding.

'05 35 Cabo
 
Lil' Bump in case anyone knows and was able to add pic now.

I think the orientation is wrong on the pic but there's a little ledge to the left that has three holes in it where the old fuse would go. Two smaller holes ones by the edge and one larger in middle.

Looks like o O o in that semicircular ledge.

Just wish I know what type and size fuse would go there since the current set up es no bueno.

Thanks again.

J
 

Attachments

  • Fuseblock 2.webp
    Fuseblock 2.webp
    82.9 KB · Views: 73
Last edited:
That's not hooked up as a fuse.

Its a standard ami type fuse.if memory serves
 
Thanks. For some reason I thought it was to be some kind of circuit breaker and not a fuse.

Now I wonder if I got confused and the guy was just talking about replacing the fuse but that entire set up attaches to that ledge and it just needs to have the right fuse inserted. Like you said, the std AMI.

Not sure where I got the circuit breaker idea from.

Thanks, I'll measure the holes to see if it fits to what's there now and maybe go with it. Just wire it so the fuse in inline instead of the way it is now.
 
Or if you need get a different fuse and fuse holder. If it's the fuse for the lift make sure its accessible with the thing shut.. if not you may be calling for help.
 
Just in case someone comes along looking for the same (highly unlikely, but ya never know).

Found it: Klixon SDLM-105 - circuit breaker.

Actually, surprised it's so high but confirmed with two boats. Both Cabos of different vintages but both had 105's. '05 style of breaker was dif than the 36' '07s but both 105 amp.

Thanks again all,

J
 

Attachments

  • 105 Fuse.webp
    105 Fuse.webp
    78 KB · Views: 46
  • 105 Fuse 2.webp
    105 Fuse 2.webp
    47.2 KB · Views: 48
Thanks for creating such a useful thread.
 

Forum statistics

Threads
38,152
Messages
448,690
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom