Where to look for original hose '78 6-71 J&T

[Top Hatt Craig]

I'd like to tidy up our raw water lines but need a short near-right angle hose that I'm assuming was once in the spot circled. Thanks for any thoughts, Craig

 

[Glory]

If you remove the hose, bring it to a an auto parts store an accomplished parts person should be able to match the hose srom the many preformed hoses they stock.

 

[SEVEN]

Craig, I wonder if that was a form fitted hose from the factory. That one looks like it was added by the PO. Happy Thanksgiving. Hope to see you this weekend.

 

[Tim Powell]

http://www.yellowpages.com/mount-laurel-nj/mip/johnson-towers-inc-6889367

GIVE THESE GUYS A CALL I GOT SOME GRATE INFO FROM THEM REGARDING INJECTOR

 

[newinlet]

You can get that from a good automotive store I have the same motor the setup looks a little different but does the same thing

 

[steve c]

I replaced a number of hoses with silicone blue hoses from Pegasus Auto Racing. Great stock, prices and delivery. The hose is easy to work with and should last a long time.
They have a number of angles and hose lengths which can be cut for your application. The silicon hose is easy to work with and make sure to get the specific clamps which are smooth on the inside.

 

[Top Hatt Craig]

I replaced a number of hoses with silicone blue hoses from Pegasus Auto Racing. Great stock, prices and delivery. The hose is easy to work with and should last a long time.They have a number of angles and hose lengths which can be cut for your application. The silicon hose is easy to work with and make sure to get the specific clamps which are smooth on the inside.

Thanks Steve, you Da' Bomb!https://www.pegasusautoracing.com/productdetails.asp?RecID=11057