V berth sheets

[rwappleton]

Does anyone make fitted sheets for the Fwd V berth???? 43DC


Did someone post on here about flexable AC lines? I have a leak on the stateroom side that no one seems to be able to find.

Thanks!

Becky and Russ

 

[bostonhatteras]

I think Hatteras wives are responsible for the custom sheets! Ive heard sealer is a viable solution to impossible to find Freon leaks

 

[carolinacoast]

These guys made my mattresses and did a beautiful job. If they cannot help they could direct you.
http://www.zenomattress.com/

I'm not totally clear about your AC question, but believe I use series 135 hose for the raw water side.

 

[rwappleton]

Thanks Mal,

I will call them on the sheets.

I have a so far impossible to find slow Freon leak. The original lines are copper but I remember reading somewhere of lines that were more flexable and would be easier to run as replacements.

Best Regards,

Russ

 

[carolinacoast]

Russ - PEX with shark bite fittings may be what you are referring too. Good luck.

 

[bigbill]

cant use pex for freon lines... russ, go back with refrigeration grade copper, it lasted this long, why no go with a proven product.
have you checked the service valves with soapy water? check the high side while the unit is running to get more pressure, and check the low side with the unit off it will then have a higher pressure.

 

[carolinacoast]

I thought these could be used? These may just be the regular grade copper lines big bill is referring to. Pex works great for water lines, though

http://www.pexsupply.com/Refrigerant-Line-Sets-Copper-Fittings-For-HVAC-1690000

 

[1jparker]

Lands end has great fitted sheets with the elastic all the way around. They are great! Just replaced copper water lines with PEX, but a no no where freon is involved.