Bill Root
Well-known member
- Joined
- Oct 26, 2007
- Messages
- 817
- Status
- OWNER - I own a Hatteras Yacht
- Hatteras Model
- 54' MOTOR YACHT (1985 - 1988)
I have just finished replacing the split shafts on my boat with one piece Aquamet 22 shafts. Each of the old shaft sets has a 4' and a 9' section joined by a heavy brass collar. I also have a spare 4' shaft section.
The three 4' sections are out of tolerance 0, 3 & 6 thousands. All can be trued. The 9' sections are out 6 and 9 thousandths. They have some wear and pitting at the ends. I have two of the brass collars and one copper covering sleeve.
I would like to sell as a package, but frankly, have no idea of the value. If interested, make me an offer based on you paying shipping.
The three 4' sections are out of tolerance 0, 3 & 6 thousands. All can be trued. The 9' sections are out 6 and 9 thousandths. They have some wear and pitting at the ends. I have two of the brass collars and one copper covering sleeve.
I would like to sell as a package, but frankly, have no idea of the value. If interested, make me an offer based on you paying shipping.
