Trouble shooting Princess stove

[rob71]

My 120 Volt Princess stove popped the breaker.
Upon examination I found that the oven control switch was loose and rotated into contact with the frame.
After fixing that I noticed that even with the breaker off I was getting electrical tingle when touching the frame and the toggle switches. If I shut off the main , no current, but no matter which individual breaker I closed the current remained. Suggestions ??

 

[SKYCHENEY]

My 120 Volt Princess stove popped the breaker.
Upon examination I found that the oven control switch was loose and rotated into contact with the frame.
After fixing that I noticed that even with the breaker off I was getting electrical tingle when touching the frame and the toggle switches. If I shut off the main , no current, but no matter which individual breaker I closed the current remained. Suggestions ??

Sounds like reverse polarity. Have you tried it on a different pedestal or on genny power?

 

[rob71]

Thanks Sky,
The polarity test on the panel does not light up.
I just checked some of the outlets with a plug-in tester and found some are correct but one had open neutral and another had open ground apparently I have more than one problem.