Still Parting Out 34' Hatteras

[wndsr]

Parting Out the 34' Hatteras has been going pretty well. If there is anything anyone can use, there is still some hardware and misc items available. I have a 1973 53' Classic and have found that most of the hardware etc is the same style so dont let the fact that it is a 34' fool you. Also keep in mind at the end of this-I will still have a "rock solid" Hatteras hull. Rather than take a sawzall to it and dispose of it, it would be great to see it get used for something! Keep it in mind and allow your imagination to wonder.
Thanks!!

 

[SRN]

Parting Out the 34' Hatteras has been going pretty well. If there is anything anyone can use, there is still some hardware and misc items available. I have a 1973 53' Classic and have found that most of the hardware etc is the same style so dont let the fact that it is a 34' fool you. Also keep in mind at the end of this-I will still have a "rock solid" Hatteras hull. Rather than take a sawzall to it and dispose of it, it would be great to see it get used for something! Keep it in mind and allow your imagination to wonder.
Thanks!!

i could lower kitchen draw for my 36 conv also header wood thats around top above side windows iam in florida email at srn@villamarlin.com thanks

 

[67hat34c]

which model of 34 is it? I could possibly use the doors under galley sink for a 34c. also there may be some other wood that i could use.

Where is the boat located.

 

[the kuz]

By any chance were there bullet shaped chrome plugs in the bow end of the 1" grip rails on the outside of the salon side walls? Have been looking for them for years, but no luck so far. Thanks, Bob K

 

[Traveler 45C]

I'm interested in:
An engine alarm panel.
Throttle and gear levers with the Hatt logo
Tackle station

 

[Capt.Erich]

Do you have any photo's of the hull? How about the year? Is it a Sedan, SC, or SF? Saw your previous post. Where in PA is she located?

 

[wndsr]

It is registered as a 1963. It is a sedan with a flybridge (if that makes sense) and it is located just outside of York,Pa. I havent figured out how to attach pictures to email sent from this site(feel free to educate me). If you send me your email address I can send you pictures. And anyone else for that matter.
Thanks
Ben

 

[Capt.Erich]

Ben,

I'm sending you a PM with contact info.

Erich

 

[Hatadoit]

I might be interested in the companion way door and hardware, as well as the knobs for the oven.

Thanks,
Bruce.

 

[wndsr]

Bruce,
Tried to email you and the site says you prefer not to recieve emails. Please provide me with an email address if you want pics. Exactly what door do you need? This is a sedan. Therefore has a large salon with galley,head and v-berth below. There are doors entering the v-berth and head. There are no doors that separate the salon from below. Hope this helps
Ben

 

[Traveler 45C]

Ben, I'm sending you a PM.

 

[danshat]

Do you still have the flybridge available? I spoke to you awhile back and wasn't able to get it then. I may be able to swing it now if it's still available.

Thanks,

Dan

 

[mel burns]

are u still parting out a 34 sedan? I need a flybridge windshield, and a center section on the salon bridge windshield.

 

[wndsr]

Windshield is available. It has some "crazing" at the corners. I will send pics if interested. However there is a gentleman interested in the entire flybridge so he may buy the entire assy. As far as the center windshield-That is also avail. I assume you need the frame and glass?-that is how I would remove it to save time etc.
Please let me know your thoughts.
Ben

 

[mix]

I have just bought a 34'Sedan 1964-with DD4-53n's.I want to restore or replace the portlites-someone loaded mine up with white paint-are they bronze under all that? do you have some in good orginal condition/ Thanks-Alan

 

[wndsr]

Alan,
I havent had much luck uploading pics here. Please send me your email address to wndsr366@aol.com and I will send you pics.
Thanks
Ben

 

[Domelli]

Do you have the door handle lock mechanism available- can you send a picture?
Thanks

 

[wndsr]

Domeli,
Rear salon door lock mechanism is already gone.
Thanks

 

[ELECTRA VI]

I would be interested in the rear bulkhead and doors if they fit a 1966 34C.

 

[johngalt]

I don't know if they will work on my boat but I am in need of a knob and lockset for my stateroom on a 1966 41c. Bruce