Stainless Split Ring

[JLR]

I am looking for a stainless steel split ring where the diameter of the ring is about one inch. Any ideas where to find one? I have had limited luck looking online. Thanks.

 

[Oldlaxer1]

https://www.mcmaster.com/stainless-steel-split-rings

 

[JLR]

Thank you. I am looking for ones sturdy enough to attach to the grommets on the end of my aft deck shade to accept a pelican hook from my shade poles. The grommets are too far from the corner of the shade to accept the pelican hook themselves.

 

[Pascal]

Just make sure the stainless steel rings doesn’t cut thru the softer grommets as it rubs in a breeze. Something soft like a small line loop maybe better in the long run. Or even a soft shackle

https://www.westmarine.com/buy/west...tors-soft-shackle-small--12501904?recordNum=7

 

[Oldlaxer1]

Just make sure the stainless steel rings doesn’t cut thru the softer grommets as it rubs in a breeze. Something soft like a small line loop maybe better in the long run. Or even a soft shackle

https://www.westmarine.com/buy/west...tors-soft-shackle-small--12501904?recordNum=7

I would second the soft shackle. They are quite easy to make especially if you are not putting ridiculous loads on them. (the knot is the tricky part but for the loads you're talking about, it can be simple.)

 

[JLR]

Thanks to all.