Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Something is just itching to break.

  • Thread starter Thread starter madhatter1
  • Start date Start date
  • Replies Replies 6
  • Views Views 2,095

madhatter1

Legendary Member
Joined
Jul 12, 2010
Messages
1,778
Status
  1. OWNER - I own a Hatteras Yacht
Hatteras Model
34' CONVERTIBLE (1965 - 1969)
Haul out- Check. Serviced bottom, props, and some cutlass bearings.
Mechanic- Check. Serviced 2 leaking turbo housings, several service items, verified temps, and getting over required full RPM's.
Electric- Check. Replaces starboard side 8D's after replacing port last year with AGM's. Had to go sealed lead acid on starboard since no one has AGM's due to rona shutdowns. At least I can compare them over time.

So now all seems to be perfect. But Now we have a trip down south for a week. You just know something is hanging on by a thread! As long as I have no diesel leaks and the AC keeps running for the wife we can deal with the rest. Fingers crossed.
 
Haul out- Check. Serviced bottom, props, and some cutlass bearings.
Mechanic- Check. Serviced 2 leaking turbo housings, several service items, verified temps, and getting over required full RPM's.
Electric- Check. Replaces starboard side 8D's after replacing port last year with AGM's. Had to go sealed lead acid on starboard since no one has AGM's due to rona shutdowns. At least I can compare them over time.

So now all seems to be perfect. But Now we have a trip down south for a week. You just know something is hanging on by a thread! As long as I have no diesel leaks and the AC keeps running for the wife we can deal with the rest. Fingers crossed.


Good luck and fair seas, hope ya'll have a great time, shake the bugs loose
 
Haul out- Check. Serviced bottom, props, and some cutlass bearings.
Mechanic- Check. Serviced 2 leaking turbo housings, several service items, verified temps, and getting over required full RPM's.
Electric- Check. Replaces starboard side 8D's after replacing port last year with AGM's. Had to go sealed lead acid on starboard since no one has AGM's due to rona shutdowns. At least I can compare them over time.

So now all seems to be perfect. But Now we have a trip down south for a week. You just know something is hanging on by a thread! As long as I have no diesel leaks and the AC keeps running for the wife we can deal with the rest. Fingers crossed.

I remember sitting in Fort Lauderdale at the helm of my sailboat the night before leaving for the Chesapeake, outside, alone. A friend had stopped by to say good bye and share a cold one.

I said to him: "You know everything on this boat is working right now?" I saw the look in his eyes, and before he could even say the words the wind instruments in front of me went dark. They didn't come back until a week after the trip was over, and after that never had another issue.

Nowadays I don't even dare THINK the words. Good luck. ;););)

(As an aside.... when I sold it EVERYTHING worked during the survey... Surveyor was amazed.)
 
My son and I were in my 34 running on plane for a bit a few years back and since bottom was cleaned that day it was making full speed and everything was running perfect. I commented to him that the boat is really running great. Instantly (no exaggeration) port engine RPM's dropped. It was just a booger in the fuel tank pickup and we were easily underway after switching to the other tank. But I know it happened because I jinxed it!
 
My story may not be as dramatic as some. I am to 19 6546 foot Chris-Craft constellation. It was considered a 10 out of 10 boats. Absolutely everything worked because I maintained it that way. I sold it just after I bought my 53 Hatteras. The day we signed the papers in the galley with the new Owner the refrigerator stopped working. I had to replace it within a few days. As I’ve always said it’s always something.
 
Are you using the same charger for the lead-acid and AGM banks? Because I think if you do that, you have to set it for the AGM charging curve, which doesn't top out at quite the level the lead-acid one does?
 
Well it is certainly still 2020! On NHC there was a yellow X destined to head NE to the Atlantic giving us great weather being on the west side for our trip. Wake up this morning and it's a friggin orange X heading into the Gulf. Next report its a red X! Where can I get a job and have no idea what's going on and still be an expurt?

Heading to Bradenton and then Sarasota for Saturday and Sunday. Monday morning decisions will need to be made.

2020 sucks.
 

Forum statistics

Threads
38,155
Messages
448,720
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom