Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

SMX II Control Problem

Bob Bradley

Legendary Member
Joined
Apr 12, 2005
Messages
3,663
Hatteras Model
43' CONVERTIBLE-Series I (1978 - 1983)
CruiseAire system. The SMX II controller may have failed. Couple days ago I went to turn off the heat and turn on the AC (typical New England May day). The system would not turn off or switch directly from heat to AC. The only button on the display that did anything at all was the Fan Down button which when pressed caused all the other buttons indicator lights to flash. Any experience or suggestions other than the obvious: replace it?
 
CruiseAire system. The SMX II controller may have failed. Couple days ago I went to turn off the heat and turn on the AC (typical New England May day). The system would not turn off or switch directly from heat to AC. The only button on the display that did anything at all was the Fan Down button which when pressed caused all the other buttons indicator lights to flash. Any experience or suggestions other than the obvious: replace it?

You might try unplugging the controller from the connector and reconnecting first to try and see if it reacts positively. My first "go to" when controller/unit is acting up... Usually settles things unless there is a code showing.
 
I had this with my Sxm Iv controller. I tapped on the control box in engine room and that did it
 
I left the breaker off for a couple hours and then reset it. When it came back on it was still in heat, but it let me switch it to cool. AC is working but stuck on at 68 degrees. No more response from any buttons. I think the controller is shot.
 
I left the breaker off for a couple hours and then reset it. When it came back on it was still in heat, but it let me switch it to cool. AC is working but stuck on at 68 degrees. No more response from any buttons. I think the controller is shot.

Did you disconnect at controller and reconnect? Those connections are temperamental and simply turning off breaker will not reset...
 
Mine worked like that for several years. Last year the control box fried and I had to put in a retrofit kit from a company in nj
 
Just splashed my Bertram and the same thing! Guest room controller worked fine when it went in the barn and now nothing! Flipped the breaker a couple of times no luck. Will pull it and try the unplug and plug back in but I believe that one is an original so fully depreciated!!
While we are sleeping the boat is breaking! Never ends.....
 

Forum statistics

Threads
38,156
Messages
448,728
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom