sling location for 1979 46 conv

[takefive]

Anyone know where sling locations are for this model? There are no indicators on the boat, don't know if Hatteras ever put them on back then.
Thanks

 

[Boatsb]

Aft bulkhead or just forward of aft rub rails and Fwd bulkhead Fwd of the engines.

If there are stabilizers things change.

 

[SeaEric]

If you have the original Hatteras manual that came with the boat - there should be a "graving plan" diagram in there.

 

[takefive]

I do not have original manual, checked here on site and nothing.

 

[saltshaker]

Aft bulkhead or just forward of aft rub rails and Fwd bulkhead Fwd of the engines.

If there are stabilizers things change.

This is how my 46C was lifted. Any good lift operator will know where to lift the boat unless there is something out of the ordinary with the boat.

 

[takefive]

ok, thank you much. I figured as much on the bulkheads, just wanted other opinions

 

[drburke]

It has been said before here, but you would be well served to contact Hatteras for a replacement manual set.

DAN