Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

[tomrealest]

Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Does anyone have any experience with this Pettit paint? Heard a sales pitch on it but I am looking for real experience. I am hauling out in May and am making my plans for what I am going to use.

 

[MVCaprice]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

No. If you haven't already purchased I would do a search for "cold galv". I started using it as many others have and its super cheap.

 

[bobk]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Does anyone have any experience with this Pettit paint? Heard a sales pitch on it but I am looking for real experience. I am hauling out in May and am making my plans for what I am going to use.

I had it installed by Atlantic Yacht Basin several years ago. It didn't hold up well enough for me to use it again, but I was running 3000 miles a year at that point.

Bobk

 

[Finalee]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Cold galvanizing works great! Of course the boat sees 200 hours a year with an average speed of 27 knots. Well maybe 20 if you factor trolling time and docking.

 

[bobk]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Cold galvanizing works great! Of course the boat sees 200 hours a year with an average speed of 27 knots. Well maybe 20 if you factor trolling time and docking.

I tried that too, but it didn't last long. Can you comment on your results without the cold galvanizing? Perhaps your speed and frequent use are keeping the gear clean??

Bobk

 

[wpc691]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Two coats of Barnacle Barrier under two coats of Hydrocoat Eco on running gear 1 1/2 yrs ago. Diver reports it’s in good shape. This was recommended by the paint/fiberglass guy who recored my front deck; so far, so good.

 

[doc g]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Tom,
we have been using Velox http://www.antifoulingpaint.net/ . Holds up well, any growth pretty much wipes off. I have it only on propellers now and will apply to all my underwater metal at our next haul....Pat

 

[luckydave215]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

I applied several coats of cold galvanize at my last haul.
My diver told me it lasted a month, typical for San Diego.
Not worth the trouble here.

 

[Nonchalant1]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

I put Petit Prop Coat & Barnacle Barrier on carefully on one prop and one shaft and left the other one bare. 2 months in fresh water and one month in salt water later, no difference between the treated and untreated metal. No thanks here. I did run from Chicago to Key West during those months, so running may have made a difference.

 

[Finalee]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

I tried that too, but it didn't last long. Can you comment on your results without the cold galvanizing? Perhaps your speed and frequent use are keeping the gear clean??

Bobk

I used it on a 43 DC also. Ran her 100 hours per year. Worked better than no paint. Certainly the usage makes a difference. Hauling the Tiara next week. I'll report on the shape of the old cold galvanizing. There has been quite a bit left each time. The props are Nibral.

 

[DCMY #92]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

I applied Velox to shafts, props and rudders a year ago (salt water in Florida). Very little operation - unfortunately. The diver says its OK so far.

 

[Westfield 11]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Any further reports on Prop Coat? I am considering this since I neglected to treat my running gear when I did the bottom this spring. Here in brackish water on the Ortega River there is little growth and no barnacles, but we are heading south soon and I have been told that this or something similar is a necessity in South Florida.

 

[Boatsb]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Just used the new glidecoat prop optimizer. It went on easy and beautifully smooth. A week later we moved the boat to a lift slip so I'm guessing it will last forever.

That's the story of my life. Nothing goes as planned.

 

[Reefgeorge]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Used it once, yard reported that it was a b#$*h to get off when I had my next bottom job. Not sure if it helped.

George

 

[oscarvan]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Just used the new glidecoat prop optimizer. It went on easy and beautifully smooth. A week later we moved the boat to a lift slip so I'm guessing it will last forever.

That's the story of my life. Nothing goes as planned.

Or as I aways say.... "No plan survives first contact with the enemy"......

 

[Boatsb]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

I will say the props look great a month after launch.

Then again the coating keeps them shiny and doesn't show waterspots.

 

[DCMY #92]

Re: Running Gear Pettit "Prop Coat Barnacle Barrier" #1792 Protects Underwater Metal

Velox applied to shafts and props 2 1/2 years ago - very little running. Diver this week said running gear was "fair".