One more try at 41c cockpit shift levers

[steve c]

Does anyone have or have added cockpit controls in a 41c ? I'm not looking for a debate on whether to add or not just advice on how and where they are positioned and connected to the gear. The use will primarily short handed fishing.

 

[Jim saco]

I have a full lower station on my starboard side in the cockpit. It came from The factory set up this way. The shift and throttle levers are connected in parallel with the bridge cables. I have 2 sets of Teleflex control cables at each gear. The port engine has 2 cables paralleled at the engine throttle. The starboard side throttle gets paralleled at the Syncronizer. Then one cable from the Syncroniser to the starboard engine throttle. Hope this helps.

 

[steve c]

Thank you for the reply. What power and transmisions are you using ?

 

[Jim saco]

545 HP 6v92 DD with twin disc gears.

 

[steve c]

I have 671 485 Covingtons with Capitol gears. My intention is shift levers only. Any ideas on a " disable solution " for the cockpit levers?