Need a little afromosia

[GJD]

Looking for about a 4 x 4 ft piece of 1/2" afromosia plywood for a small fixer upper project. Thought I'd post on the off chance anybody might have some extra laying around. Hoping not to have to pony up for a whole 4 x 8 sheet (about $200 at World Panel Products)

Thanks all!

 

[SKYCHENEY]

I think a roll of veneer from Sams is about $160. It's much cheaper to ship too. Then when you're finished with it, you can put the rest of it on here. Someone will buy it and once again, it's easy to roll up and ship.

 

[GJD]

Good idea Sky - Thanks

 

[Brian Degulis]

Why not just go with teak? About $100 for a sheet and probably available near you. It's so close just a little adjustment with some stain gets an easy match with the rest of the boat.

Brian

 

[GJD]

Considering it's just a couple little door fronts (on the built in cabinet rear of salon star side, for example) that just might do the trick. Gracias Brian.

 

[yachtsmanbill]

I have a bunch of misc. sized pcs AND some doors (various cabinet sizes) and drawer fronts left over from the 58TC job. Nothing thats 4X4 feet, but if you need some matching small stuff let me know. It would probably be more practical to drive up here than ship the stuff tho...
I can send you pics if you provide sizes needed.... ws

 

[GJD]

Will get some sizes. Thanks so much YMW! Will bird dog that tonight.

 

[GJD]

Bill - A door 18 x 13 and/or a drawer to fit an opening 17.5 x 4.5 would be a jackpot find for me. Please holler if you have something. Thanks a lot!