Starman
Well-known member
- Joined
- Jun 25, 2006
- Messages
- 842
- Hatteras Model
- Not Currently A Hatteras Owner
Hello Everyone; I am Paul Starzynski aka Starman. It has been awhile since I have been here visiting. Last September I closed Swan Point Marina & Boatyard Inc in Sneads Ferry NC. We actually closed when we were having a great year, but I was just plain burnt out. The only family time we had is when we were actually at the marina, so we quit !
I have several items left over from inventory that are for sale.
Everything I list here is brand new, never installed and in most cases is in the original box.
First up is a Custom Made Stainless steel and tinted forward hatch that should fit most hats. It requires an opening 26 inches wide ( this is the hinge side as well and will be aft ) the flange on this end is 28 5/8 wide. It is 25 1/2 inches deep ( bow to stern ) and that flange is 28 inches wide. This is a very sweet low profile hatch. The fastners are conceled by the hatch itself. You May have to install some trim on the interior of your opening for a custom fit. I installed this same hatch on Boss Lady, a 48 Sportfisher. ( no that project is not complete, it is on hold for the time being ) Cost when ordered was over 900.00 will sell for 400.00
Bennett V351 Hydraulic Power unit with double switch , wires and tubing. There are no actuators in the kit. Asking 150.00
Standard Horizon CPV 350. This is a very nice VHF / Haler system. Accessories to this init can be found online as it is a current item. Dealer cost was 984.00 asking 400.00
1000 foot roll of tinned copper 12/2 wire made by berkshire. Blue outer shield w yellow/red inside.
asking 300.00
Hubble;
hbl503ss 50a/125v qty 3
hbl504ss 50a/125/250v qty 1
hbl303ss 30a/125v qty 2sold
hblphtvss qty 1
Asking 50.00 each
Stainless Steel double window tracks. They come in 8 foot sections. qty 6 asking 40.00 each or 200.00 for all 6
Stainless steel window divider/seal . ( the verticle pc that seals the gap between sliding windows ) This also comes in 8 foot sections. I have 2. Asking 50.00 each
I also have the aluminum version, 2 black and 1 brown. aking 25.00 each
Viking deck hatches, round. 8", requires 9 1/4 inch hole. flange size is 11" qty 4, white;
asking 50.00 all 4
Beckson deck hathes, round 6 inch, requires 6 1/2 inch hole, flange size is 8 " qty 5
asking 50.00 for all 5
Interlux:
Schooner high gloss varnish, UV, quart size qty 2
Goldspar satin Sheen for interior use quart size qty 3
asking 25.00 per quart or 100.00 for all 5
Epifanes;
rapid coat, semi gloss clear , UV w/teak tint qty 3
brush thinner quart size qty 2
asking 25.00 each or 50.00 for all 5 sold
Perko sidelights. LED, 24 volt. I have 3 pair.
Thery say for boats under 65 foot, but I feel for boats in the 30-40 foot range is decent.
25.00 per set
Whitecap 8 inch ships bell. Cast Brass, chrome plated, 40.00sold
Guest corosion meter. This tests your zincs etc...
comes in water tight box. This item looks like it has never been used, but so far is the only thing I can not swear to 100% as being brand new.
So how about 40.00 sold
I do have more items to put up such as:
updated Onan, westerbeke and kholer gen parts
Some really nice Weems & Plath clocks /barometers and the like.
I have real teak a/c louver vents
veneers
and several other items,
I will get these up in next wek or so.
To contact me, please do so by email instead of PM.
starcarpentry@hotmail.com
I can send pics of all items.
and of course all prices are " plus shipping "
Hope everyone has been and still are doing well.
Thanx;
Paul ( aka Starman )
I have several items left over from inventory that are for sale.
Everything I list here is brand new, never installed and in most cases is in the original box.
First up is a Custom Made Stainless steel and tinted forward hatch that should fit most hats. It requires an opening 26 inches wide ( this is the hinge side as well and will be aft ) the flange on this end is 28 5/8 wide. It is 25 1/2 inches deep ( bow to stern ) and that flange is 28 inches wide. This is a very sweet low profile hatch. The fastners are conceled by the hatch itself. You May have to install some trim on the interior of your opening for a custom fit. I installed this same hatch on Boss Lady, a 48 Sportfisher. ( no that project is not complete, it is on hold for the time being ) Cost when ordered was over 900.00 will sell for 400.00
Bennett V351 Hydraulic Power unit with double switch , wires and tubing. There are no actuators in the kit. Asking 150.00
Standard Horizon CPV 350. This is a very nice VHF / Haler system. Accessories to this init can be found online as it is a current item. Dealer cost was 984.00 asking 400.00
1000 foot roll of tinned copper 12/2 wire made by berkshire. Blue outer shield w yellow/red inside.
asking 300.00
Hubble;
hbl503ss 50a/125v qty 3
hbl504ss 50a/125/250v qty 1
hbl303ss 30a/125v qty 2sold
hblphtvss qty 1
Asking 50.00 each
Stainless Steel double window tracks. They come in 8 foot sections. qty 6 asking 40.00 each or 200.00 for all 6
Stainless steel window divider/seal . ( the verticle pc that seals the gap between sliding windows ) This also comes in 8 foot sections. I have 2. Asking 50.00 each
I also have the aluminum version, 2 black and 1 brown. aking 25.00 each
Viking deck hatches, round. 8", requires 9 1/4 inch hole. flange size is 11" qty 4, white;
asking 50.00 all 4
Beckson deck hathes, round 6 inch, requires 6 1/2 inch hole, flange size is 8 " qty 5
asking 50.00 for all 5
Interlux:
Schooner high gloss varnish, UV, quart size qty 2
Goldspar satin Sheen for interior use quart size qty 3
asking 25.00 per quart or 100.00 for all 5
Epifanes;
rapid coat, semi gloss clear , UV w/teak tint qty 3
brush thinner quart size qty 2
asking 25.00 each or 50.00 for all 5 sold
Perko sidelights. LED, 24 volt. I have 3 pair.
Thery say for boats under 65 foot, but I feel for boats in the 30-40 foot range is decent.
25.00 per set
Whitecap 8 inch ships bell. Cast Brass, chrome plated, 40.00sold
Guest corosion meter. This tests your zincs etc...
comes in water tight box. This item looks like it has never been used, but so far is the only thing I can not swear to 100% as being brand new.
So how about 40.00 sold
I do have more items to put up such as:
updated Onan, westerbeke and kholer gen parts
Some really nice Weems & Plath clocks /barometers and the like.
I have real teak a/c louver vents
veneers
and several other items,
I will get these up in next wek or so.
To contact me, please do so by email instead of PM.
starcarpentry@hotmail.com
I can send pics of all items.
and of course all prices are " plus shipping "
Hope everyone has been and still are doing well.
Thanx;
Paul ( aka Starman )
Last edited:
