miboatnutz
Well-known member
- Joined
- Aug 29, 2016
- Messages
- 202
- Status
- OWNER - I own a Hatteras Yacht
- Hatteras Model
- Not Currently A Hatteras Owner
Had a failed triac that I replaced (different story that I'll post later) and now the system seems to run just fine except with the thermostat set to auto the compressor cycles on and off properly but the blower runs constantly regardless setting.
I've got the old Honeywell thermostats with the selector switch at the bottom with three choices: auto, off and on (l to r). I thought the blower cycles on and off with the compressor when set to auto and remains running constantly only when the switch is in the "On" position.
Not sure if I got a bad thermostat holding the blower circuit closed in the auto position or if there's some other setting in the system that can keep the blower running.
As always any feedback would be greatly appreciated!
I've got the old Honeywell thermostats with the selector switch at the bottom with three choices: auto, off and on (l to r). I thought the blower cycles on and off with the compressor when set to auto and remains running constantly only when the switch is in the "On" position.
Not sure if I got a bad thermostat holding the blower circuit closed in the auto position or if there's some other setting in the system that can keep the blower running.
As always any feedback would be greatly appreciated!