Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Hatteras 41 Sportfish

SilverQueen

Member
Joined
Aug 2, 2014
Messages
14
Status
  1. OWNER - I own a Hatteras Yacht
Hatteras Model
41' CONVERTBLE-Series I (1964 - 1971)
I have a 1965 41C that needs a new home. I have had her for 4 years as my first Hatteras.
Yes I learned a lot, Anyway I spent a while cleaning then in 2017 I did all the stuff that seemed right to me, Including,
New Thru Hulls X 9
New Sea Strainers, Hoses.
The Keel was a little beat, so removed all ruff Stuff and dried and filled with Hi Density foam and Re-Glassed the Keel, Nice Job too.
Trued the Shafts, New Shaft Couplers, New Cutless Brgs.
New Ground Plates, New Zincs Etc. New Rudder Posts,
Nice Bottom Job, Removed the old Air Units and Water Htr. Painted Bilge.

Then Replaced Starboard Fuel System, Need to do Port, 2 New 8D Batterys

Then New Bimini Top and Front Window Cover. Re Did many Cushions.

Started Cleaning up all the Wiring, Removed the old Head.
Oh Yea, Got the right size Props, Not Installed Yet. But Have Them.
Hull ## is 41RL 83
The Wood inside is complete and Excellent. It had the wet bar. so no inside Helm but all
the Gages.

Then My Adult Onset A.D.D. Set in and I got a Bigger Boat A 46, Because I loved the
Helm Seating, and the Wife wanted Something with a little more Room.

So I am now a Two Yacht Guy, :cool: Please Buy One. How about $20,000.

I have all receipts Etc. Coast Guard Docs. Will post Pics as soon as I figure out How
Boat is located Fort Meyers Beach, This Boat is DRY the bilge comes on about once in 6 Months.
Backdoor is Ruff. Have done some Paint, Needs More. Thanks for checking.
 

Attachments

  • IMG_0814-2.webp
    IMG_0814-2.webp
    54.2 KB · Views: 392
Curious what kind of props you have on her.
 
Funny You should ask;
the previous owner had some new props put on and never looked at them,
I could not get any RPM,s out of the engine when I drove it over on one screw.
When I had the Bottom Done, We found out they were 24 X 27
So I got some 24 X 24 that I have not installed Yet.
27 Pitch Does not get it.
However, at idle the 27 pitch pushes un-naturally hard, meaning lots more thrust than
you would expect.:p
 

Forum statistics

Threads
38,156
Messages
448,754
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom