Galley Maid head small feed hose

[MVCaprice]

Does anyone have the specs or a source for the small feed hose behind the galley maid toilet bowl? A couple of ours are either missing or crimped and we suspect that it's causing dry run issues.

I emailed galley maid and haven't heard back, but I suspect I can get this locally easier....

 

[BoaterGirl]

I think what your looking for is the siphon elbow. I was looking for one a month ago and never heard back from Galley Maid but a buddy of mine told me to call Raz Marine. They had a kit for something like $60.00. Nice people and fast service too!

 

[Artzco]

I just bought a vacuflush pump kit from SeaCoast Services. They carry most everything vacuflush and great company to deal with, and good prices.

http://seacoastservices.com/vacuflush-parts/

 

[dottieshusband]

Mine was a clear vinyl hose, 3/8 or 1/2 OD, I got replacement hose at Home Depot. Mine was blocked and the head would basically burp as you flushed. I cleared the fitting with a small wire and replaced the hose. No more burping.

 

[MVCaprice]

Mine was a clear vinyl hose, 3/8 or 1/2 OD, I got replacement hose at Home Depot. Mine was blocked and the head would basically burp as you flushed. I cleared the fitting with a small wire and replaced the hose. No more burping.

This is exactly what I'm looking for. I'll give Home Depot a shot. Thank you.

 

[SEVEN]

Make sure it's not the cheap hose that kinks easy or flattens out on a bend.

 

[SEVEN]

Tap plastic sells a higher quality hose if you have them in your area.

 

[MVCaprice]

Tap plastic sells a higher quality hose if you have them in your area.

I do have a Tap close. Thanks for the suggestion Do you happen to know the ID of the hose?

 

[SEVEN]

Size is listed on the second post. I would however cut yours off and take it with you. Yours might be a different set up than ours. Have fun.

 

[MVCaprice]

I measured the hose and it's 3/8" ID. I also picked up some vinyl tubing from tap plastics. Thanks for the advice.