Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

From the "most dangerous job" show

  • Thread starter Thread starter Jaxfishgyd
  • Start date Start date
  • Replies Replies 9
  • Views Views 3,455

Jaxfishgyd

Legendary Member
Joined
Jun 2, 2005
Messages
2,442
Hatteras Model
43' DOUBLE CABIN (1970 - 1984)
OK,

I admit I am hooked on that show..... ( l like Sig best).

Have also watched the version usijng the N.E. lobstermen, which isn't nearly as good as the crab fishermen...

But now I am watching "Tuna Wranglers" on the Discovery Channel. This is a neat show and totally interesting on how they catch thousands of tuna on one boat in a net then transfer the fish to a "holding pen" that is towed back to port keeping the fish alive....
 
I'm watching it now too...I have a friend in auzzyland, looks fun, maybe I should change careers before I even start one haha
 
Thanks for the heads up. I just turned it on.
 
Watching those guys wrestle sharks reminded me of discussing a 'yard bill' at a marina - but with more wiggle room! Pretty interesting show, not as many colorful salts but very interesting! My fishing trips seem somewhat 'skimpy' by comparison, must be the accent?
 
Like this guy?
shark.jpg

http://www.growfish.com.au/content.asp?contentid=809
 
could that fit in your boat Tod? If so I may want to buy it.
 
Hmmmm lets see here, 6 meters = 19.685039 feet. Yep it will just fit, IF YOU'VE LOST YOUR FRIGGEN' MIND :D
 
When I was a teen in Naples Fla.. I worked on a 27ft shark boat. There was 3 of us. We had a trout line about 150/200 yards long and made of chain. At each end was a 55 gallon drum attached as a float. About every 30 ft was a 6 FT. chain leader and a 8 inch hook. On the front starboard gunnel of the boat was a wooden drum about 12 inches in dia. and protruded horazontal outboard. The gunnel was about 14 inches wide. We had a 14ft. derick in the center of the boat to help lift sharks on board. We would hook the chain over the drum and run the chain down the gunnel and out the stern of the boat. The first person was to sedate the shark. Sedation depended on the sharks size. We would place the boat in gear at idle and it would just follow the trout line. The middle man was to help remove the shark and position it on the deck. The third man was to bate the hook and see that it went over and out the stern. I don't think we caught anything that big, but we did have 3 that we could not get in the boat. We averaged about 6 sharks a day. Great fun. All we had was a compass. No life jackets, radio, flares, Nothing. We were licenced to fish the entire west coast of Florida. This was in the 60's. Marco Island had an old wooden bridge. We would take our sharks to Marco Island and prepare them. Great fun back then.

BILL
 
Bill,

I am jealous of your America. My generation can't even wipe our own a$$ without being told how to do it by big brother watching out for us.
 
Krush,

Every generation wishes it was born "earlier".....

But understand a few things, we didn't have A/C in our house till I was 9 but we never missed it, till after we got it...And we lived in S. Fla.

I remember on sunday evenings about 100 people sitting in front of the local TV store as it had a COLOR TV set in it's front window and we watch the Wonderfull World of Disney(about the ONLY show in color). It was new then and no one had or could afford one. Plus we only had 3 channels to watch anyway.

And I remember laughing out loud when an "old man" told me to just enjoy this part of my life as I was 20 and he said "for you, this WILL be the Good Old Days".

He was really old too.... Like 56 or so.......... Wait ! I'M NOW 56 !!!!!

And he was right....
 

Forum statistics

Threads
38,156
Messages
448,745
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom