engine shut down cable nut

[Scott Mather]

Looking for one of these nuts.
Someone must have lost when replacing the cable.

Have found complete cable kits but just looking for (1) nut.

Made by: morse, who became teleflex who became seastar.

its part of a "DC Cable"

 

[KPTIM]

You will most likely have to buy the kit (Tee handle and Nut).
It is made by Teleflex.
Part number is 301916.
Stock item.

 

[SeaEric]

FYI - they are plastic now. I just bought two sets this past Fall.

 

[dottieshusband]

In general, those are called hex flange nuts or shoulder nuts. I know your looking for an exact match, but if you don't find it, as an alternative, you could replace them both with shoulder nuts.

 

[SEVEN]

There’s a place called the blue pelican Inn Alameda California. They sell used parts on consignment. I visited there a couple weeks ago and I believe I saw the part that you’re looking for. Why don’t you call them and see if they can help you out. 1-510-769-4858

 

[Scott Mather]

Thanks for the help, I ended up purchasing a new assembly.

By the way, consignment store is : blue pelican marine, they have an eBay store.

 

[jrbrein]

FYI - they are plastic now. I just bought two sets this past Fall.

Eric,

Do you mean that you purchased the set including the T handle, locking nut (metal), washers and cable for about $70 for one set?

Jon

 

[robert miller]

Hello,

i hope that you have mostly eliminated the need for those shutdown pulls by replacing the old style injector racks.

rob