Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Deal on LED lights

  • Thread starter Thread starter Cricket
  • Start date Start date
  • Replies Replies 11
  • Views Views 4,773

Cricket

Legendary Member
Joined
Aug 22, 2006
Messages
1,422
Status
  1. OWNER - I own a Hatteras Yacht
Hatteras Model
50' CONV -Series I (1966 - 1969)
Just saw this on Ebay if anyone is looking for led fixtures.
We installed about 20 of these Quick Marine Kai Led fixtures 2 years ago and they've been really great.
Even at wholesale paid almost twice as much as these are.

http://www.ebay.com/itm/232056828849

Have no relationship to the seller or OEM.
 
That is a great deal. Thanks for the heads up.
 
What type of dimmers and transformers are used with these lights? Any idea how much depth they require for mounting?
 
Only have 1 room on a dimmer because I've only been able to get 1 correct Vimar switch for the Blue Seas led dimmer.
Quick makes a dimmer, might try one if I can use Vimar switches that are available. Or I'm going to have to change over to current Vimar switches, which I'm trying to avoid.

Transformers are Meanwell Led driver, don't know the models. Also have some powered by 24 volts.
Btw, we used the warm white colored light 6w fixtures with stainless bezel.

Quick Kai link

http://www.quickmarinelighting.com/?lng=en&cs1=01&ms1=2&ms2=1&ms3=3&ms4=348

Specifications

Power type Constant Voltage
Light source 0 x LED
Supply 10 ÷ 30 V
Power consumption 6 W
Current consumption 0.25 A @ 24V
Average lifetime 50,000 h
Dimmable Yes
IP security degree 66
Dimensions
Frame Ø 3 7/32"
Recess 1 3/16"
Hole Ø 2 9/16"

[/B]
 
Just saw this on Ebay if anyone is looking for led fixtures.
We installed about 20 of these Quick Marine Kai Led fixtures 2 years ago and they've been really great.
Even at wholesale paid almost twice as much as these are.

http://www.ebay.com/itm/232056828849

Have no relationship to the seller or OEM.[/QU

I do not believe they are dim-able. from the order form
 
Last edited:
Tim, just looked at the ebay listing, some of the choices must have sold out, there's still 9 satin bezel warm 6w dimmable lights left. When I first saw the listing I thought it was a mistake as they had the 6w dimmable fixtures for about $50, I had paid around $63 wholesale two years ago. I'm assuming they must be discontinuing the Kai model, purchased enough to finish replacing the rest of our lights and have some spares.
 
Boom! Score! Thanks!
 
Just received my new Kai fixtures from Quick.
Fixtures have 3 wires (red, black, white) instead of just red and black of our current Kai's.
Called Quick to ask what the deal was, their tech support picked up on the first ring, stated the white wire is for dimming but the lights will dim with just the red and black like the current model.
The support guy couldn't have been more helpful and personable.
Did ask him if they were bringing their gyros to the US and stated they're in the process of getting their installing boatyards and OEM's setup to compete with Seakeeper.
Btw, the face is exactly the same as the current lights, will try to get a couple installed over the weekend just to make sure all is good.
 
Thanks for the recommendation. I picked up a bunch of these to upgrade the lighting in my V-Birth, hallway and crew cabin. I'm thinking I will need 3 small transformers, 3 dimmers and of course 3 switches.
 
12 New Stainless LED lights for Sale

I picked up 12 of these Quick Marine KAI Warm 6W Stainless 3 Wire Part# FAMP1962X02CF00.

The cutout required is 1.75" deep x 2 3/8" diameter.

They are too deep for my use.

I paid $25.00 each and will sell all 12 for $200 including shipping. They are unused and purchased a few months ago.
 

Attachments

  • Q1.webp
    Q1.webp
    28.4 KB · Views: 67
  • Q2.webp
    Q2.webp
    26.9 KB · Views: 67
  • Q3.webp
    Q3.webp
    15.5 KB · Views: 68
Last edited:
Why does the cutout need to be 1.75" deep. Ruler seems to indicate 1-3/8" depth.
 

Forum statistics

Threads
38,156
Messages
448,745
Members
12,482
Latest member
UnaVida

Latest Posts

Trending content

Back
Top Bottom